A Combination of Laboratory Testing, RCE, and Corrosion Loop for Inhibitor Selection
- Autores
- Bianchi, Gustavo Luis; Acosta, Verónnica Viviana; Seijas, Carlos
- Año de publicación
- 2023
- Idioma
- inglés
- Tipo de recurso
- artículo
- Estado
- versión publicada
- Descripción
- Featured Application: Specific applications for the oil and gas industry. Testing of corrosion inhibitors to select the one with the best performance simulating field conditions. Corrosion inhibitors are evaluated in the oil industry with electrochemical tests of resistance to linear polarization with rotating cylinders following ASTM G170 and NACE 3T199 standards. With these tests, we can determine the corrosion rate (CR) and efficiency of corrosion inhibitors. In this work, a corrosion test protocol used by hydrocarbon-producing companies for the testing of corrosion inhibitors was used. This protocol consists of a 1045 carbon steel working electrode in a NACE solution composed of 9.62% NaCl, 0.45% CaCl2, 0.19% MgCl2, and 89.74% H2O, at a temperature of 65 °C and saturated with CO2. Each inhibitor tested was subjected to a series of 6000-4000-2000-4000-6000 rpm tests using rotating cylinder electrodes (RCEs). These electrochemical studies were carried out with the rotating cylinder to evaluate the ability of the inhibitor to prevent the corrosion of carbon steel in the presence of a centrifugal force. In our opinion, this test does not provide corrosion engineers with enough information to be used as a predictive tool, since what is obtained is the CR in a very short testing time. This document proposes the use of two more appropriate test methodologies, the rotating cylinder electrode (RCE) and the flow loop (FL), to evaluate the performance of the corrosion inhibitor. For the FL, the selected flow rate was 1.2 m/s, the same rate that fluids have in oil company pipelines installed in Neuquén, Argentina. Firstly, according to the company’s protocol, inhibitors are required to have an efficiency greater than or equal to 90% in RCE tests; therefore, inhibitors that meet these requirements were tested in the FL test. Unlike the RCE test, the FL test represents the experimental conditions of the laboratory that are closest to reality, for the evaluation of the performance of the inhibitors used in the pipelines of the oil and gas industry. FL tests have several problems involving corrosion, erosion, abrasion, biphasic fluids, the time it takes for the inhibitor to become effective, and the duration of its effectiveness.
Fil: Bianchi, Gustavo Luis. Universidad Nacional de La Plata. Facultad de Ingeniería. Instituto Malvinas; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata; Argentina
Fil: Acosta, Verónnica Viviana. Universidad Nacional de la Patagonia "San Juan Bosco"; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina
Fil: Seijas, Carlos. Universidad Nacional de La Plata. Facultad de Ingeniería. Instituto Malvinas; Argentina - Materia
-
CORROSION LOOP
RESISTANCE TO LINEAR POLARIZATION
ROTATING CYLINDER ELECTRODES - Nivel de accesibilidad
- acceso abierto
- Condiciones de uso
- https://creativecommons.org/licenses/by/2.5/ar/
- Repositorio
.jpg)
- Institución
- Consejo Nacional de Investigaciones Científicas y Técnicas
- OAI Identificador
- oai:ri.conicet.gov.ar:11336/219048
Ver los metadatos del registro completo
| id |
CONICETDig_27294903b126bb45590efdff0f6bebce |
|---|---|
| oai_identifier_str |
oai:ri.conicet.gov.ar:11336/219048 |
| network_acronym_str |
CONICETDig |
| repository_id_str |
3498 |
| network_name_str |
CONICET Digital (CONICET) |
| spelling |
A Combination of Laboratory Testing, RCE, and Corrosion Loop for Inhibitor SelectionBianchi, Gustavo LuisAcosta, Verónnica VivianaSeijas, CarlosCORROSION LOOPRESISTANCE TO LINEAR POLARIZATIONROTATING CYLINDER ELECTRODEShttps://purl.org/becyt/ford/2.5https://purl.org/becyt/ford/2Featured Application: Specific applications for the oil and gas industry. Testing of corrosion inhibitors to select the one with the best performance simulating field conditions. Corrosion inhibitors are evaluated in the oil industry with electrochemical tests of resistance to linear polarization with rotating cylinders following ASTM G170 and NACE 3T199 standards. With these tests, we can determine the corrosion rate (CR) and efficiency of corrosion inhibitors. In this work, a corrosion test protocol used by hydrocarbon-producing companies for the testing of corrosion inhibitors was used. This protocol consists of a 1045 carbon steel working electrode in a NACE solution composed of 9.62% NaCl, 0.45% CaCl2, 0.19% MgCl2, and 89.74% H2O, at a temperature of 65 °C and saturated with CO2. Each inhibitor tested was subjected to a series of 6000-4000-2000-4000-6000 rpm tests using rotating cylinder electrodes (RCEs). These electrochemical studies were carried out with the rotating cylinder to evaluate the ability of the inhibitor to prevent the corrosion of carbon steel in the presence of a centrifugal force. In our opinion, this test does not provide corrosion engineers with enough information to be used as a predictive tool, since what is obtained is the CR in a very short testing time. This document proposes the use of two more appropriate test methodologies, the rotating cylinder electrode (RCE) and the flow loop (FL), to evaluate the performance of the corrosion inhibitor. For the FL, the selected flow rate was 1.2 m/s, the same rate that fluids have in oil company pipelines installed in Neuquén, Argentina. Firstly, according to the company’s protocol, inhibitors are required to have an efficiency greater than or equal to 90% in RCE tests; therefore, inhibitors that meet these requirements were tested in the FL test. Unlike the RCE test, the FL test represents the experimental conditions of the laboratory that are closest to reality, for the evaluation of the performance of the inhibitors used in the pipelines of the oil and gas industry. FL tests have several problems involving corrosion, erosion, abrasion, biphasic fluids, the time it takes for the inhibitor to become effective, and the duration of its effectiveness.Fil: Bianchi, Gustavo Luis. Universidad Nacional de La Plata. Facultad de Ingeniería. Instituto Malvinas; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata; ArgentinaFil: Acosta, Verónnica Viviana. Universidad Nacional de la Patagonia "San Juan Bosco"; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Seijas, Carlos. Universidad Nacional de La Plata. Facultad de Ingeniería. Instituto Malvinas; ArgentinaMultidisciplinary Digital Publishing Institute2023-04info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfhttp://hdl.handle.net/11336/219048Bianchi, Gustavo Luis; Acosta, Verónnica Viviana; Seijas, Carlos; A Combination of Laboratory Testing, RCE, and Corrosion Loop for Inhibitor Selection; Multidisciplinary Digital Publishing Institute; Applied Sciences; 13; 7; 4-2023; 1-122076-3417CONICET DigitalCONICETenginfo:eu-repo/semantics/altIdentifier/url/https://www.mdpi.com/2076-3417/13/7/4586info:eu-repo/semantics/altIdentifier/doi/10.3390/app13074586info:eu-repo/semantics/openAccesshttps://creativecommons.org/licenses/by/2.5/ar/reponame:CONICET Digital (CONICET)instname:Consejo Nacional de Investigaciones Científicas y Técnicas2026-08-25T14:39:50Zoai:ri.conicet.gov.ar:11336/219048instacron:CONICETInstitucionalhttp://ri.conicet.gov.ar/Organismo científico-tecnológicoNo correspondehttp://ri.conicet.gov.ar/oai/requestdasensio@conicet.gov.ar; lcarlino@conicet.gov.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:34982026-08-25 14:39:50.501CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicasfalse |
| dc.title.none.fl_str_mv |
A Combination of Laboratory Testing, RCE, and Corrosion Loop for Inhibitor Selection |
| title |
A Combination of Laboratory Testing, RCE, and Corrosion Loop for Inhibitor Selection |
| spellingShingle |
A Combination of Laboratory Testing, RCE, and Corrosion Loop for Inhibitor Selection Bianchi, Gustavo Luis CORROSION LOOP RESISTANCE TO LINEAR POLARIZATION ROTATING CYLINDER ELECTRODES |
| title_short |
A Combination of Laboratory Testing, RCE, and Corrosion Loop for Inhibitor Selection |
| title_full |
A Combination of Laboratory Testing, RCE, and Corrosion Loop for Inhibitor Selection |
| title_fullStr |
A Combination of Laboratory Testing, RCE, and Corrosion Loop for Inhibitor Selection |
| title_full_unstemmed |
A Combination of Laboratory Testing, RCE, and Corrosion Loop for Inhibitor Selection |
| title_sort |
A Combination of Laboratory Testing, RCE, and Corrosion Loop for Inhibitor Selection |
| dc.creator.none.fl_str_mv |
Bianchi, Gustavo Luis Acosta, Verónnica Viviana Seijas, Carlos |
| author |
Bianchi, Gustavo Luis |
| author_facet |
Bianchi, Gustavo Luis Acosta, Verónnica Viviana Seijas, Carlos |
| author_role |
author |
| author2 |
Acosta, Verónnica Viviana Seijas, Carlos |
| author2_role |
author author |
| dc.subject.none.fl_str_mv |
CORROSION LOOP RESISTANCE TO LINEAR POLARIZATION ROTATING CYLINDER ELECTRODES |
| topic |
CORROSION LOOP RESISTANCE TO LINEAR POLARIZATION ROTATING CYLINDER ELECTRODES |
| purl_subject.fl_str_mv |
https://purl.org/becyt/ford/2.5 https://purl.org/becyt/ford/2 |
| dc.description.none.fl_txt_mv |
Featured Application: Specific applications for the oil and gas industry. Testing of corrosion inhibitors to select the one with the best performance simulating field conditions. Corrosion inhibitors are evaluated in the oil industry with electrochemical tests of resistance to linear polarization with rotating cylinders following ASTM G170 and NACE 3T199 standards. With these tests, we can determine the corrosion rate (CR) and efficiency of corrosion inhibitors. In this work, a corrosion test protocol used by hydrocarbon-producing companies for the testing of corrosion inhibitors was used. This protocol consists of a 1045 carbon steel working electrode in a NACE solution composed of 9.62% NaCl, 0.45% CaCl2, 0.19% MgCl2, and 89.74% H2O, at a temperature of 65 °C and saturated with CO2. Each inhibitor tested was subjected to a series of 6000-4000-2000-4000-6000 rpm tests using rotating cylinder electrodes (RCEs). These electrochemical studies were carried out with the rotating cylinder to evaluate the ability of the inhibitor to prevent the corrosion of carbon steel in the presence of a centrifugal force. In our opinion, this test does not provide corrosion engineers with enough information to be used as a predictive tool, since what is obtained is the CR in a very short testing time. This document proposes the use of two more appropriate test methodologies, the rotating cylinder electrode (RCE) and the flow loop (FL), to evaluate the performance of the corrosion inhibitor. For the FL, the selected flow rate was 1.2 m/s, the same rate that fluids have in oil company pipelines installed in Neuquén, Argentina. Firstly, according to the company’s protocol, inhibitors are required to have an efficiency greater than or equal to 90% in RCE tests; therefore, inhibitors that meet these requirements were tested in the FL test. Unlike the RCE test, the FL test represents the experimental conditions of the laboratory that are closest to reality, for the evaluation of the performance of the inhibitors used in the pipelines of the oil and gas industry. FL tests have several problems involving corrosion, erosion, abrasion, biphasic fluids, the time it takes for the inhibitor to become effective, and the duration of its effectiveness. Fil: Bianchi, Gustavo Luis. Universidad Nacional de La Plata. Facultad de Ingeniería. Instituto Malvinas; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata; Argentina Fil: Acosta, Verónnica Viviana. Universidad Nacional de la Patagonia "San Juan Bosco"; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina Fil: Seijas, Carlos. Universidad Nacional de La Plata. Facultad de Ingeniería. Instituto Malvinas; Argentina |
| description |
Featured Application: Specific applications for the oil and gas industry. Testing of corrosion inhibitors to select the one with the best performance simulating field conditions. Corrosion inhibitors are evaluated in the oil industry with electrochemical tests of resistance to linear polarization with rotating cylinders following ASTM G170 and NACE 3T199 standards. With these tests, we can determine the corrosion rate (CR) and efficiency of corrosion inhibitors. In this work, a corrosion test protocol used by hydrocarbon-producing companies for the testing of corrosion inhibitors was used. This protocol consists of a 1045 carbon steel working electrode in a NACE solution composed of 9.62% NaCl, 0.45% CaCl2, 0.19% MgCl2, and 89.74% H2O, at a temperature of 65 °C and saturated with CO2. Each inhibitor tested was subjected to a series of 6000-4000-2000-4000-6000 rpm tests using rotating cylinder electrodes (RCEs). These electrochemical studies were carried out with the rotating cylinder to evaluate the ability of the inhibitor to prevent the corrosion of carbon steel in the presence of a centrifugal force. In our opinion, this test does not provide corrosion engineers with enough information to be used as a predictive tool, since what is obtained is the CR in a very short testing time. This document proposes the use of two more appropriate test methodologies, the rotating cylinder electrode (RCE) and the flow loop (FL), to evaluate the performance of the corrosion inhibitor. For the FL, the selected flow rate was 1.2 m/s, the same rate that fluids have in oil company pipelines installed in Neuquén, Argentina. Firstly, according to the company’s protocol, inhibitors are required to have an efficiency greater than or equal to 90% in RCE tests; therefore, inhibitors that meet these requirements were tested in the FL test. Unlike the RCE test, the FL test represents the experimental conditions of the laboratory that are closest to reality, for the evaluation of the performance of the inhibitors used in the pipelines of the oil and gas industry. FL tests have several problems involving corrosion, erosion, abrasion, biphasic fluids, the time it takes for the inhibitor to become effective, and the duration of its effectiveness. |
| publishDate |
2023 |
| dc.date.none.fl_str_mv |
2023-04 |
| dc.type.none.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion http://purl.org/coar/resource_type/c_6501 info:ar-repo/semantics/articulo |
| format |
article |
| status_str |
publishedVersion |
| dc.identifier.none.fl_str_mv |
http://hdl.handle.net/11336/219048 Bianchi, Gustavo Luis; Acosta, Verónnica Viviana; Seijas, Carlos; A Combination of Laboratory Testing, RCE, and Corrosion Loop for Inhibitor Selection; Multidisciplinary Digital Publishing Institute; Applied Sciences; 13; 7; 4-2023; 1-12 2076-3417 CONICET Digital CONICET |
| url |
http://hdl.handle.net/11336/219048 |
| identifier_str_mv |
Bianchi, Gustavo Luis; Acosta, Verónnica Viviana; Seijas, Carlos; A Combination of Laboratory Testing, RCE, and Corrosion Loop for Inhibitor Selection; Multidisciplinary Digital Publishing Institute; Applied Sciences; 13; 7; 4-2023; 1-12 2076-3417 CONICET Digital CONICET |
| dc.language.none.fl_str_mv |
eng |
| language |
eng |
| dc.relation.none.fl_str_mv |
info:eu-repo/semantics/altIdentifier/url/https://www.mdpi.com/2076-3417/13/7/4586 info:eu-repo/semantics/altIdentifier/doi/10.3390/app13074586 |
| dc.rights.none.fl_str_mv |
info:eu-repo/semantics/openAccess https://creativecommons.org/licenses/by/2.5/ar/ |
| eu_rights_str_mv |
openAccess |
| rights_invalid_str_mv |
https://creativecommons.org/licenses/by/2.5/ar/ |
| dc.format.none.fl_str_mv |
application/pdf application/pdf |
| dc.publisher.none.fl_str_mv |
Multidisciplinary Digital Publishing Institute |
| publisher.none.fl_str_mv |
Multidisciplinary Digital Publishing Institute |
| dc.source.none.fl_str_mv |
reponame:CONICET Digital (CONICET) instname:Consejo Nacional de Investigaciones Científicas y Técnicas |
| reponame_str |
CONICET Digital (CONICET) |
| collection |
CONICET Digital (CONICET) |
| instname_str |
Consejo Nacional de Investigaciones Científicas y Técnicas |
| repository.name.fl_str_mv |
CONICET Digital (CONICET) - Consejo Nacional de Investigaciones Científicas y Técnicas |
| repository.mail.fl_str_mv |
dasensio@conicet.gov.ar; lcarlino@conicet.gov.ar |
| _version_ |
1874774413176471552 |
| score |
13.334379 |