Novel and simple one-pot method for the synthesis of titanium modified-CMK-3 applied in oxidative desulfutization of refractor y organosulfur compounds

Autores
Rivoira, Lorena Paola; Ledesma, Brenda Cecilia; Beltramone, Andrea Raquel
Año de publicación
2018
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
Ti-CMK-3 carbon mesoporous was prepared using a novel synthesis method. This new method avoids the hard template synthesis used commonly. The method developed here, allows reducing time, energy consumption and cost. Our primary aim in this work is to evaluate the ODS activity of the Ti-modified mesoporous carbon CMK-3, synthesized by the short time method, in order to achieve total removal of sulfur compounds from diesel fuel. The catalytic oxidation of the sulfur compound with hydrogen peroxide was carried out in a glass batch reactor, equipped with a magnetic stirrer, a thermometer and a condenser. In a typical run, the solid catalyst (60 mg) was suspended under stirring (750 rpm) in 20 mL of a solution of 500 ppm of S as DBT (or other) in acetonitrile. Then, appropriate amount of 30% aqueous H2O2 was added at constant temperature. The experiments were performed in a three-phase liquid-liquid-solid (L (oil) –L (solvent) –S (catalyst)) system, acetonitrile was used as solvent and dodecane as oil phase. Solution samples were recovered at various times. The products were analyzed by GC HP 5890 Series II with a HP-5 column and connected to FID and PFPD detectors, after filtration and eventually decantation step. The products were confirmed using a Shimadzu GCMS. Structural and textural characterization of the titanium modified-mesoporous carbon was performed by N2 adsorption, XRD, UV-Vis-DRS, XPS, Raman spectroscopy and TEM. The characterization results indicated that the textural and structural properties of the material synthesized by the short time method are comparable with the properties of the material prepared by the hard template method. Ti modified-mesoporous carbon was synthesized by different methods in order to prepare catalysts to be tested in the oxidative desulfurization (ODS) of sulfur compounds. The good performance and stability of the catalyst prepared using a novel synthesis method was attributed to well dispersed anatase nanospecies over the high area mesoporous carbon. Main advantage of the present study is the reduction of time and cost in the synthesis of the new material and the applicability for ODS reactions.
Fil: Rivoira, Lorena Paola. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.
Fil: Ledesma, Brenda Cecilia. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.
Fil: Beltramone, Andrea Raquel. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.
Materia
Direct synthesis
Short time
TiO2
ODS
DBTs
Benzothiophene
Thiophene
Nivel de accesibilidad
acceso abierto
Condiciones de uso
Attribution-NonCommercial-NoDerivatives 4.0 International
Repositorio
Repositorio Institucional Abierto (UTN)
Institución
Universidad Tecnológica Nacional
OAI Identificador
oai:ria.utn.edu.ar:20.500.12272/13420
Acceder
id RIAUTN_1a9973807b445239e747b39146288c8e
oai_identifier_str oai:ria.utn.edu.ar:20.500.12272/13420
network_acronym_str RIAUTN
repository_id_str a
network_name_str Repositorio Institucional Abierto (UTN)
spelling Novel and simple one-pot method for the synthesis of titanium modified-CMK-3 applied in oxidative desulfutization of refractor y organosulfur compoundsRivoira, Lorena PaolaLedesma, Brenda CeciliaBeltramone, Andrea RaquelDirect synthesisShort timeTiO2ODSDBTsBenzothiopheneThiopheneTi-CMK-3 carbon mesoporous was prepared using a novel synthesis method. This new method avoids the hard template synthesis used commonly. The method developed here, allows reducing time, energy consumption and cost. Our primary aim in this work is to evaluate the ODS activity of the Ti-modified mesoporous carbon CMK-3, synthesized by the short time method, in order to achieve total removal of sulfur compounds from diesel fuel. The catalytic oxidation of the sulfur compound with hydrogen peroxide was carried out in a glass batch reactor, equipped with a magnetic stirrer, a thermometer and a condenser. In a typical run, the solid catalyst (60 mg) was suspended under stirring (750 rpm) in 20 mL of a solution of 500 ppm of S as DBT (or other) in acetonitrile. Then, appropriate amount of 30% aqueous H2O2 was added at constant temperature. The experiments were performed in a three-phase liquid-liquid-solid (L (oil) –L (solvent) –S (catalyst)) system, acetonitrile was used as solvent and dodecane as oil phase. Solution samples were recovered at various times. The products were analyzed by GC HP 5890 Series II with a HP-5 column and connected to FID and PFPD detectors, after filtration and eventually decantation step. The products were confirmed using a Shimadzu GCMS. Structural and textural characterization of the titanium modified-mesoporous carbon was performed by N2 adsorption, XRD, UV-Vis-DRS, XPS, Raman spectroscopy and TEM. The characterization results indicated that the textural and structural properties of the material synthesized by the short time method are comparable with the properties of the material prepared by the hard template method. Ti modified-mesoporous carbon was synthesized by different methods in order to prepare catalysts to be tested in the oxidative desulfurization (ODS) of sulfur compounds. The good performance and stability of the catalyst prepared using a novel synthesis method was attributed to well dispersed anatase nanospecies over the high area mesoporous carbon. Main advantage of the present study is the reduction of time and cost in the synthesis of the new material and the applicability for ODS reactions.Fil: Rivoira, Lorena Paola. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.Fil: Ledesma, Brenda Cecilia. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.Fil: Beltramone, Andrea Raquel. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.Sociedad Mexicana de Materiales / Materials Research Society2025-07-01T22:37:08Z2018info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articulopdfapplication/pdfXXVII International Materials Research Congress (2018)https://hdl.handle.net/20.500.12272/13420enginfo:eu-repo/semantics/openAccessAttribution-NonCommercial-NoDerivatives 4.0 Internationalhttp://creativecommons.org/licenses/by-nc-nd/4.0/Rivoira , Lorena Paola; Ledesma, Brenda Cecilia; Beltramone, Andrea Raquelhttps://creativecommons.org/licenses/by-nc-nd/4.0/reponame:Repositorio Institucional Abierto (UTN)instname:Universidad Tecnológica Nacional2026-10-01T11:59:47Zoai:ria.utn.edu.ar:20.500.12272/13420instacron:UTNInstitucionalhttp://ria.utn.edu.ar/Universidad públicaNo correspondehttp://ria.utn.edu.ar/oaigestionria@rec.utn.edu.ar; fsuarez@rec.utn.edu.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:a2026-10-01 11:59:48.653Repositorio Institucional Abierto (UTN) - Universidad Tecnológica Nacionalfalse
dc.title.none.fl_str_mv Novel and simple one-pot method for the synthesis of titanium modified-CMK-3 applied in oxidative desulfutization of refractor y organosulfur compounds
title Novel and simple one-pot method for the synthesis of titanium modified-CMK-3 applied in oxidative desulfutization of refractor y organosulfur compounds
spellingShingle Novel and simple one-pot method for the synthesis of titanium modified-CMK-3 applied in oxidative desulfutization of refractor y organosulfur compounds
Rivoira, Lorena Paola
Direct synthesis
Short time
TiO2
ODS
DBTs
Benzothiophene
Thiophene
title_short Novel and simple one-pot method for the synthesis of titanium modified-CMK-3 applied in oxidative desulfutization of refractor y organosulfur compounds
title_full Novel and simple one-pot method for the synthesis of titanium modified-CMK-3 applied in oxidative desulfutization of refractor y organosulfur compounds
title_fullStr Novel and simple one-pot method for the synthesis of titanium modified-CMK-3 applied in oxidative desulfutization of refractor y organosulfur compounds
title_full_unstemmed Novel and simple one-pot method for the synthesis of titanium modified-CMK-3 applied in oxidative desulfutization of refractor y organosulfur compounds
title_sort Novel and simple one-pot method for the synthesis of titanium modified-CMK-3 applied in oxidative desulfutization of refractor y organosulfur compounds
dc.creator.none.fl_str_mv Rivoira, Lorena Paola
Ledesma, Brenda Cecilia
Beltramone, Andrea Raquel
author Rivoira, Lorena Paola
author_facet Rivoira, Lorena Paola
Ledesma, Brenda Cecilia
Beltramone, Andrea Raquel
author_role author
author2 Ledesma, Brenda Cecilia
Beltramone, Andrea Raquel
author2_role author
author
dc.subject.none.fl_str_mv Direct synthesis
Short time
TiO2
ODS
DBTs
Benzothiophene
Thiophene
topic Direct synthesis
Short time
TiO2
ODS
DBTs
Benzothiophene
Thiophene
dc.description.none.fl_txt_mv Ti-CMK-3 carbon mesoporous was prepared using a novel synthesis method. This new method avoids the hard template synthesis used commonly. The method developed here, allows reducing time, energy consumption and cost. Our primary aim in this work is to evaluate the ODS activity of the Ti-modified mesoporous carbon CMK-3, synthesized by the short time method, in order to achieve total removal of sulfur compounds from diesel fuel. The catalytic oxidation of the sulfur compound with hydrogen peroxide was carried out in a glass batch reactor, equipped with a magnetic stirrer, a thermometer and a condenser. In a typical run, the solid catalyst (60 mg) was suspended under stirring (750 rpm) in 20 mL of a solution of 500 ppm of S as DBT (or other) in acetonitrile. Then, appropriate amount of 30% aqueous H2O2 was added at constant temperature. The experiments were performed in a three-phase liquid-liquid-solid (L (oil) –L (solvent) –S (catalyst)) system, acetonitrile was used as solvent and dodecane as oil phase. Solution samples were recovered at various times. The products were analyzed by GC HP 5890 Series II with a HP-5 column and connected to FID and PFPD detectors, after filtration and eventually decantation step. The products were confirmed using a Shimadzu GCMS. Structural and textural characterization of the titanium modified-mesoporous carbon was performed by N2 adsorption, XRD, UV-Vis-DRS, XPS, Raman spectroscopy and TEM. The characterization results indicated that the textural and structural properties of the material synthesized by the short time method are comparable with the properties of the material prepared by the hard template method. Ti modified-mesoporous carbon was synthesized by different methods in order to prepare catalysts to be tested in the oxidative desulfurization (ODS) of sulfur compounds. The good performance and stability of the catalyst prepared using a novel synthesis method was attributed to well dispersed anatase nanospecies over the high area mesoporous carbon. Main advantage of the present study is the reduction of time and cost in the synthesis of the new material and the applicability for ODS reactions.
Fil: Rivoira, Lorena Paola. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.
Fil: Ledesma, Brenda Cecilia. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.
Fil: Beltramone, Andrea Raquel. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.
description Ti-CMK-3 carbon mesoporous was prepared using a novel synthesis method. This new method avoids the hard template synthesis used commonly. The method developed here, allows reducing time, energy consumption and cost. Our primary aim in this work is to evaluate the ODS activity of the Ti-modified mesoporous carbon CMK-3, synthesized by the short time method, in order to achieve total removal of sulfur compounds from diesel fuel. The catalytic oxidation of the sulfur compound with hydrogen peroxide was carried out in a glass batch reactor, equipped with a magnetic stirrer, a thermometer and a condenser. In a typical run, the solid catalyst (60 mg) was suspended under stirring (750 rpm) in 20 mL of a solution of 500 ppm of S as DBT (or other) in acetonitrile. Then, appropriate amount of 30% aqueous H2O2 was added at constant temperature. The experiments were performed in a three-phase liquid-liquid-solid (L (oil) –L (solvent) –S (catalyst)) system, acetonitrile was used as solvent and dodecane as oil phase. Solution samples were recovered at various times. The products were analyzed by GC HP 5890 Series II with a HP-5 column and connected to FID and PFPD detectors, after filtration and eventually decantation step. The products were confirmed using a Shimadzu GCMS. Structural and textural characterization of the titanium modified-mesoporous carbon was performed by N2 adsorption, XRD, UV-Vis-DRS, XPS, Raman spectroscopy and TEM. The characterization results indicated that the textural and structural properties of the material synthesized by the short time method are comparable with the properties of the material prepared by the hard template method. Ti modified-mesoporous carbon was synthesized by different methods in order to prepare catalysts to be tested in the oxidative desulfurization (ODS) of sulfur compounds. The good performance and stability of the catalyst prepared using a novel synthesis method was attributed to well dispersed anatase nanospecies over the high area mesoporous carbon. Main advantage of the present study is the reduction of time and cost in the synthesis of the new material and the applicability for ODS reactions.
publishDate 2018
dc.date.none.fl_str_mv 2018
2025-07-01T22:37:08Z
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv XXVII International Materials Research Congress (2018)
https://hdl.handle.net/20.500.12272/13420
identifier_str_mv XXVII International Materials Research Congress (2018)
url https://hdl.handle.net/20.500.12272/13420
dc.language.none.fl_str_mv eng
language eng
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
Attribution-NonCommercial-NoDerivatives 4.0 International
http://creativecommons.org/licenses/by-nc-nd/4.0/
Rivoira , Lorena Paola; Ledesma, Brenda Cecilia; Beltramone, Andrea Raquel
https://creativecommons.org/licenses/by-nc-nd/4.0/
eu_rights_str_mv openAccess
rights_invalid_str_mv Attribution-NonCommercial-NoDerivatives 4.0 International
http://creativecommons.org/licenses/by-nc-nd/4.0/
Rivoira , Lorena Paola; Ledesma, Brenda Cecilia; Beltramone, Andrea Raquel
https://creativecommons.org/licenses/by-nc-nd/4.0/
dc.format.none.fl_str_mv pdf
application/pdf
dc.publisher.none.fl_str_mv Sociedad Mexicana de Materiales / Materials Research Society
publisher.none.fl_str_mv Sociedad Mexicana de Materiales / Materials Research Society
dc.source.none.fl_str_mv reponame:Repositorio Institucional Abierto (UTN)
instname:Universidad Tecnológica Nacional
reponame_str Repositorio Institucional Abierto (UTN)
collection Repositorio Institucional Abierto (UTN)
instname_str Universidad Tecnológica Nacional
repository.name.fl_str_mv Repositorio Institucional Abierto (UTN) - Universidad Tecnológica Nacional
repository.mail.fl_str_mv gestionria@rec.utn.edu.ar; fsuarez@rec.utn.edu.ar
_version_ 1877862419386073088
score 13.365483

Publicaciones similares