Method to determine the dosage of bituminous tack coat in function of the texture of milled asphalt layers to be overlaid

Autores
Rivera, José Julián; Bianchetto, Hugo Daniel; Martínez Reguero, Adriana
Año de publicación
2019
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
In the rehabilitation of flexible pavements with asphalt layers, it is necessary to apply a bituminous tack coat with a pre-established dosage, which usually does not take into account the degree of texture generated if a milling operation is previously performed, since this increases the surface at the interface. On the other hand, when milling, grooves are obtained that could lead to the runoff of bitumen emulsion with excessive deposition in their valleys due to dosages greater than those needed. This work analyzes the above mentioned and achieves a compromise solution, with its corresponding method of application, based on the mechanical behavior obtained with different degrees of texture and validated for typical materials used in Argentina.
Fil: Bianchetto, Hugo Daniel. Universidad Tecnológica Nacional. Facultad Regional Avellaneda; Argentina
Fil: Rivera, José Julián. Universidad Tecnológica Nacional. LEMaC (Centro de Investigaciones Viales). CIC PBA; Argentina
Fil: Martínez Reguero, Adriana. Universidad Tecnológica Nacional. LEMaC (Centro de Investigaciones Viales). CIC PBA; Argentina
Fil: Martínez Reguero, Adriana. Universidad Politécnica de Catalunya; España
Peer Reviewed
Materia
Road engineering
Asphalt overlays
Pavement milling
Bituminous tack coat
Nivel de accesibilidad
acceso abierto
Condiciones de uso
2021-10-05T12:59:31Z
Repositorio
Repositorio Institucional Abierto (UTN)
Institución
Universidad Tecnológica Nacional
OAI Identificador
oai:ria.utn.edu.ar:20.500.12272/5537
Acceder
id RIAUTN_28b4d6edf3db8c7d8e6ab87411ab7455
oai_identifier_str oai:ria.utn.edu.ar:20.500.12272/5537
network_acronym_str RIAUTN
repository_id_str a
network_name_str Repositorio Institucional Abierto (UTN)
spelling Method to determine the dosage of bituminous tack coat in function of the texture of milled asphalt layers to be overlaidRivera, José JuliánBianchetto, Hugo DanielMartínez Reguero, AdrianaRoad engineeringAsphalt overlaysPavement millingBituminous tack coatIn the rehabilitation of flexible pavements with asphalt layers, it is necessary to apply a bituminous tack coat with a pre-established dosage, which usually does not take into account the degree of texture generated if a milling operation is previously performed, since this increases the surface at the interface. On the other hand, when milling, grooves are obtained that could lead to the runoff of bitumen emulsion with excessive deposition in their valleys due to dosages greater than those needed. This work analyzes the above mentioned and achieves a compromise solution, with its corresponding method of application, based on the mechanical behavior obtained with different degrees of texture and validated for typical materials used in Argentina. Fil: Bianchetto, Hugo Daniel. Universidad Tecnológica Nacional. Facultad Regional Avellaneda; ArgentinaFil: Rivera, José Julián. Universidad Tecnológica Nacional. LEMaC (Centro de Investigaciones Viales). CIC PBA; ArgentinaFil: Martínez Reguero, Adriana. Universidad Tecnológica Nacional. LEMaC (Centro de Investigaciones Viales). CIC PBA; ArgentinaFil: Martínez Reguero, Adriana. Universidad Politécnica de Catalunya; EspañaPeer Reviewed2021-10-05T12:59:31Z2021-10-05T12:59:31Z2019info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfInternational Journal of Pavement Engineering, Francis&Taylor1029-8436http://hdl.handle.net/20.500.12272/553710.1080/10298436.2019.1576875enginfo:eu-repo/semantics/openAccess2021-10-05T12:59:31Zhttp://creativecommons.org/licenses/by-nc-nd/4.0/Attribution-NonCommercial-NoDerivatives 4.0 InternacionalAtribución (Attribution): En cualquier explotación de la obra autorizada por la licencia será necesario reconocer la autoría (obligatoria en todos los casos). No comercial (Non Commercial): La explotación de la obra queda limitada a usos no comerciales. Sin obras derivadas (No Derivate Works): La autorización para explotar la obra no incluye la posibilidad de crear una obra derivada (traducciones, adaptaciones, etc.).reponame:Repositorio Institucional Abierto (UTN)instname:Universidad Tecnológica Nacional2026-09-24T12:46:56Zoai:ria.utn.edu.ar:20.500.12272/5537instacron:UTNInstitucionalhttp://ria.utn.edu.ar/Universidad públicaNo correspondehttp://ria.utn.edu.ar/oaigestionria@rec.utn.edu.ar; fsuarez@rec.utn.edu.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:a2026-09-24 12:46:57.793Repositorio Institucional Abierto (UTN) - Universidad Tecnológica Nacionalfalse
dc.title.none.fl_str_mv Method to determine the dosage of bituminous tack coat in function of the texture of milled asphalt layers to be overlaid
title Method to determine the dosage of bituminous tack coat in function of the texture of milled asphalt layers to be overlaid
spellingShingle Method to determine the dosage of bituminous tack coat in function of the texture of milled asphalt layers to be overlaid
Rivera, José Julián
Road engineering
Asphalt overlays
Pavement milling
Bituminous tack coat
title_short Method to determine the dosage of bituminous tack coat in function of the texture of milled asphalt layers to be overlaid
title_full Method to determine the dosage of bituminous tack coat in function of the texture of milled asphalt layers to be overlaid
title_fullStr Method to determine the dosage of bituminous tack coat in function of the texture of milled asphalt layers to be overlaid
title_full_unstemmed Method to determine the dosage of bituminous tack coat in function of the texture of milled asphalt layers to be overlaid
title_sort Method to determine the dosage of bituminous tack coat in function of the texture of milled asphalt layers to be overlaid
dc.creator.none.fl_str_mv Rivera, José Julián
Bianchetto, Hugo Daniel
Martínez Reguero, Adriana
author Rivera, José Julián
author_facet Rivera, José Julián
Bianchetto, Hugo Daniel
Martínez Reguero, Adriana
author_role author
author2 Bianchetto, Hugo Daniel
Martínez Reguero, Adriana
author2_role author
author
dc.subject.none.fl_str_mv Road engineering
Asphalt overlays
Pavement milling
Bituminous tack coat
topic Road engineering
Asphalt overlays
Pavement milling
Bituminous tack coat
dc.description.none.fl_txt_mv In the rehabilitation of flexible pavements with asphalt layers, it is necessary to apply a bituminous tack coat with a pre-established dosage, which usually does not take into account the degree of texture generated if a milling operation is previously performed, since this increases the surface at the interface. On the other hand, when milling, grooves are obtained that could lead to the runoff of bitumen emulsion with excessive deposition in their valleys due to dosages greater than those needed. This work analyzes the above mentioned and achieves a compromise solution, with its corresponding method of application, based on the mechanical behavior obtained with different degrees of texture and validated for typical materials used in Argentina.
Fil: Bianchetto, Hugo Daniel. Universidad Tecnológica Nacional. Facultad Regional Avellaneda; Argentina
Fil: Rivera, José Julián. Universidad Tecnológica Nacional. LEMaC (Centro de Investigaciones Viales). CIC PBA; Argentina
Fil: Martínez Reguero, Adriana. Universidad Tecnológica Nacional. LEMaC (Centro de Investigaciones Viales). CIC PBA; Argentina
Fil: Martínez Reguero, Adriana. Universidad Politécnica de Catalunya; España
Peer Reviewed
description In the rehabilitation of flexible pavements with asphalt layers, it is necessary to apply a bituminous tack coat with a pre-established dosage, which usually does not take into account the degree of texture generated if a milling operation is previously performed, since this increases the surface at the interface. On the other hand, when milling, grooves are obtained that could lead to the runoff of bitumen emulsion with excessive deposition in their valleys due to dosages greater than those needed. This work analyzes the above mentioned and achieves a compromise solution, with its corresponding method of application, based on the mechanical behavior obtained with different degrees of texture and validated for typical materials used in Argentina.
publishDate 2019
dc.date.none.fl_str_mv 2019
2021-10-05T12:59:31Z
2021-10-05T12:59:31Z
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv International Journal of Pavement Engineering, Francis&Taylor
1029-8436
http://hdl.handle.net/20.500.12272/5537
10.1080/10298436.2019.1576875
identifier_str_mv International Journal of Pavement Engineering, Francis&Taylor
1029-8436
10.1080/10298436.2019.1576875
url http://hdl.handle.net/20.500.12272/5537
dc.language.none.fl_str_mv eng
language eng
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
2021-10-05T12:59:31Z
http://creativecommons.org/licenses/by-nc-nd/4.0/
Attribution-NonCommercial-NoDerivatives 4.0 Internacional
Atribución (Attribution): En cualquier explotación de la obra autorizada por la licencia será necesario reconocer la autoría (obligatoria en todos los casos). No comercial (Non Commercial): La explotación de la obra queda limitada a usos no comerciales. Sin obras derivadas (No Derivate Works): La autorización para explotar la obra no incluye la posibilidad de crear una obra derivada (traducciones, adaptaciones, etc.).
eu_rights_str_mv openAccess
rights_invalid_str_mv 2021-10-05T12:59:31Z
http://creativecommons.org/licenses/by-nc-nd/4.0/
Attribution-NonCommercial-NoDerivatives 4.0 Internacional
Atribución (Attribution): En cualquier explotación de la obra autorizada por la licencia será necesario reconocer la autoría (obligatoria en todos los casos). No comercial (Non Commercial): La explotación de la obra queda limitada a usos no comerciales. Sin obras derivadas (No Derivate Works): La autorización para explotar la obra no incluye la posibilidad de crear una obra derivada (traducciones, adaptaciones, etc.).
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.source.none.fl_str_mv reponame:Repositorio Institucional Abierto (UTN)
instname:Universidad Tecnológica Nacional
reponame_str Repositorio Institucional Abierto (UTN)
collection Repositorio Institucional Abierto (UTN)
instname_str Universidad Tecnológica Nacional
repository.name.fl_str_mv Repositorio Institucional Abierto (UTN) - Universidad Tecnológica Nacional
repository.mail.fl_str_mv gestionria@rec.utn.edu.ar; fsuarez@rec.utn.edu.ar
_version_ 1877230931163480064
score 13.265058

Publicaciones similares