Hydrogen incidence on tensile strength behavior of AISI 316L stainless steel
- Autores
- Inés, Mariano Nicolás; Mansilla, Graciela Analía
- Año de publicación
- 2022
- Idioma
- inglés
- Tipo de recurso
- documento de conferencia
- Estado
- versión aceptada
- Descripción
- Most paper in literature are devoted on the effect caused by chromium carbides on the tensile behavior of stainless steels, for example, it is known that the precipitation of M23C6, M6C and Sigma Phase are harmful under certain operative conditions, although there are only few papers related with hydrogen embrittlement in type 316L stainless steels. Even though hydrogen slightly modifies the mechanical behavior of these stainless steels, it should be considered to avoid significant economic losses. The aim of this work is to evaluate the effect on mechanical response of hydrogen charged AISI 316L stainless steel samples. To achieve homogeneous carbides precipitation, specific thermal treatments were conducted on as-received samples. Then three sets of samples were considered to carry out tensile tests. Before that, a group of heat-treated samples were hydrogen charged, in a 1N H2SO4 electrolytic solution with 0.25 g/L NaAsO2 as hydrogen promoter agent, using graphite anode and a constant current density of 35 mA/cm2 for 3.5 h. After tensile tests, the resulting fracture surfaces exhibited mixed ductile-brittle behavior in hydrogen charged samples in comparison with the ductile morphology obtained in uncharged ones. In addition, in hydrogenated samples cracks were found associated with fine chromium carbides, while ductile well-developed dimples were found in uncharged samples. In coincidence, there was a ductility loss in electrolytic hydrogen charged samples, which was not observed in those uncharged ones. In order to identify hydrogen - carbides interactions, a selective metallographic technique made it possible to find grain boundaries and carbides/matrix interfaces as the main hydrogen traps. Furthermore, differential scanning calorimetry (DSC) tests were performed to obtain hydrogen desorption temperatures. Results allowed to settle that those carbides developed during thermal treatments are responsible for deleterious hydrogen trapping that may cause mechanical failure on AISI 316L stainless steel.
Fil: Inés, Mariano Nicolás. Universidad Tecnológica Nacional. Facultad Regional San Nicolás. Departamento Metalurgia. Centro DEYTEMA; Argentina.
Fil: Mansilla, Graciela Analía. Universidad Tecnológica Nacional. Facultad Regional San Nicolás. Departamento Metalurgia. Centro DEYTEMA; Argentina. - Materia
-
Hydrogen
Hidrogeno
Propiedades mecánicas
Mechanical properties
Acero inoxidable
Stainless steel
Carburos
Carbides - Nivel de accesibilidad
- acceso abierto
- Condiciones de uso
- Attribution-NonCommercial-NoDerivatives 4.0 International
- Repositorio
.jpg)
- Institución
- Universidad Tecnológica Nacional
- OAI Identificador
- oai:ria.utn.edu.ar:20.500.12272/11742
Ver los metadatos del registro completo
| id |
RIAUTN_6f186b7384147cf9ba7be960e82690d0 |
|---|---|
| oai_identifier_str |
oai:ria.utn.edu.ar:20.500.12272/11742 |
| network_acronym_str |
RIAUTN |
| repository_id_str |
a |
| network_name_str |
Repositorio Institucional Abierto (UTN) |
| spelling |
Hydrogen incidence on tensile strength behavior of AISI 316L stainless steelInés, Mariano NicolásMansilla, Graciela AnalíaHydrogenHidrogenoPropiedades mecánicasMechanical propertiesAcero inoxidableStainless steelCarburosCarbidesMost paper in literature are devoted on the effect caused by chromium carbides on the tensile behavior of stainless steels, for example, it is known that the precipitation of M23C6, M6C and Sigma Phase are harmful under certain operative conditions, although there are only few papers related with hydrogen embrittlement in type 316L stainless steels. Even though hydrogen slightly modifies the mechanical behavior of these stainless steels, it should be considered to avoid significant economic losses. The aim of this work is to evaluate the effect on mechanical response of hydrogen charged AISI 316L stainless steel samples. To achieve homogeneous carbides precipitation, specific thermal treatments were conducted on as-received samples. Then three sets of samples were considered to carry out tensile tests. Before that, a group of heat-treated samples were hydrogen charged, in a 1N H2SO4 electrolytic solution with 0.25 g/L NaAsO2 as hydrogen promoter agent, using graphite anode and a constant current density of 35 mA/cm2 for 3.5 h. After tensile tests, the resulting fracture surfaces exhibited mixed ductile-brittle behavior in hydrogen charged samples in comparison with the ductile morphology obtained in uncharged ones. In addition, in hydrogenated samples cracks were found associated with fine chromium carbides, while ductile well-developed dimples were found in uncharged samples. In coincidence, there was a ductility loss in electrolytic hydrogen charged samples, which was not observed in those uncharged ones. In order to identify hydrogen - carbides interactions, a selective metallographic technique made it possible to find grain boundaries and carbides/matrix interfaces as the main hydrogen traps. Furthermore, differential scanning calorimetry (DSC) tests were performed to obtain hydrogen desorption temperatures. Results allowed to settle that those carbides developed during thermal treatments are responsible for deleterious hydrogen trapping that may cause mechanical failure on AISI 316L stainless steel.Fil: Inés, Mariano Nicolás. Universidad Tecnológica Nacional. Facultad Regional San Nicolás. Departamento Metalurgia. Centro DEYTEMA; Argentina.Fil: Mansilla, Graciela Analía. Universidad Tecnológica Nacional. Facultad Regional San Nicolás. Departamento Metalurgia. Centro DEYTEMA; Argentina.2024-12-03T12:21:35Z2022-05-13info:eu-repo/semantics/conferenceObjectinfo:eu-repo/semantics/acceptedVersionhttp://purl.org/coar/resource_type/c_5794info:ar-repo/semantics/documentoDeConferenciapdfapplication/pdfhttps://www.alliedacademies.org/proceedings/hydrogen-incidence-on-tensile-strength-behavior-of-aisi-316l-stainless-steel-6885.htmlhttps://ria.utn.edu.ar/handle/20.500.12272/11742enginfo:eu-repo/semantics/openAccessAttribution-NonCommercial-NoDerivatives 4.0 Internationalhttp://creativecommons.org/licenses/by-nc-nd/4.0/Licencia Creative Commonsreponame:Repositorio Institucional Abierto (UTN)instname:Universidad Tecnológica Nacional2026-10-29T11:26:16Zoai:ria.utn.edu.ar:20.500.12272/11742instacron:UTNInstitucionalhttp://ria.utn.edu.ar/Universidad públicaNo correspondehttp://ria.utn.edu.ar/oaigestionria@rec.utn.edu.ar; fsuarez@rec.utn.edu.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:a2026-10-29 11:26:17.288Repositorio Institucional Abierto (UTN) - Universidad Tecnológica Nacionalfalse |
| dc.title.none.fl_str_mv |
Hydrogen incidence on tensile strength behavior of AISI 316L stainless steel |
| title |
Hydrogen incidence on tensile strength behavior of AISI 316L stainless steel |
| spellingShingle |
Hydrogen incidence on tensile strength behavior of AISI 316L stainless steel Inés, Mariano Nicolás Hydrogen Hidrogeno Propiedades mecánicas Mechanical properties Acero inoxidable Stainless steel Carburos Carbides |
| title_short |
Hydrogen incidence on tensile strength behavior of AISI 316L stainless steel |
| title_full |
Hydrogen incidence on tensile strength behavior of AISI 316L stainless steel |
| title_fullStr |
Hydrogen incidence on tensile strength behavior of AISI 316L stainless steel |
| title_full_unstemmed |
Hydrogen incidence on tensile strength behavior of AISI 316L stainless steel |
| title_sort |
Hydrogen incidence on tensile strength behavior of AISI 316L stainless steel |
| dc.creator.none.fl_str_mv |
Inés, Mariano Nicolás Mansilla, Graciela Analía |
| author |
Inés, Mariano Nicolás |
| author_facet |
Inés, Mariano Nicolás Mansilla, Graciela Analía |
| author_role |
author |
| author2 |
Mansilla, Graciela Analía |
| author2_role |
author |
| dc.subject.none.fl_str_mv |
Hydrogen Hidrogeno Propiedades mecánicas Mechanical properties Acero inoxidable Stainless steel Carburos Carbides |
| topic |
Hydrogen Hidrogeno Propiedades mecánicas Mechanical properties Acero inoxidable Stainless steel Carburos Carbides |
| dc.description.none.fl_txt_mv |
Most paper in literature are devoted on the effect caused by chromium carbides on the tensile behavior of stainless steels, for example, it is known that the precipitation of M23C6, M6C and Sigma Phase are harmful under certain operative conditions, although there are only few papers related with hydrogen embrittlement in type 316L stainless steels. Even though hydrogen slightly modifies the mechanical behavior of these stainless steels, it should be considered to avoid significant economic losses. The aim of this work is to evaluate the effect on mechanical response of hydrogen charged AISI 316L stainless steel samples. To achieve homogeneous carbides precipitation, specific thermal treatments were conducted on as-received samples. Then three sets of samples were considered to carry out tensile tests. Before that, a group of heat-treated samples were hydrogen charged, in a 1N H2SO4 electrolytic solution with 0.25 g/L NaAsO2 as hydrogen promoter agent, using graphite anode and a constant current density of 35 mA/cm2 for 3.5 h. After tensile tests, the resulting fracture surfaces exhibited mixed ductile-brittle behavior in hydrogen charged samples in comparison with the ductile morphology obtained in uncharged ones. In addition, in hydrogenated samples cracks were found associated with fine chromium carbides, while ductile well-developed dimples were found in uncharged samples. In coincidence, there was a ductility loss in electrolytic hydrogen charged samples, which was not observed in those uncharged ones. In order to identify hydrogen - carbides interactions, a selective metallographic technique made it possible to find grain boundaries and carbides/matrix interfaces as the main hydrogen traps. Furthermore, differential scanning calorimetry (DSC) tests were performed to obtain hydrogen desorption temperatures. Results allowed to settle that those carbides developed during thermal treatments are responsible for deleterious hydrogen trapping that may cause mechanical failure on AISI 316L stainless steel. Fil: Inés, Mariano Nicolás. Universidad Tecnológica Nacional. Facultad Regional San Nicolás. Departamento Metalurgia. Centro DEYTEMA; Argentina. Fil: Mansilla, Graciela Analía. Universidad Tecnológica Nacional. Facultad Regional San Nicolás. Departamento Metalurgia. Centro DEYTEMA; Argentina. |
| description |
Most paper in literature are devoted on the effect caused by chromium carbides on the tensile behavior of stainless steels, for example, it is known that the precipitation of M23C6, M6C and Sigma Phase are harmful under certain operative conditions, although there are only few papers related with hydrogen embrittlement in type 316L stainless steels. Even though hydrogen slightly modifies the mechanical behavior of these stainless steels, it should be considered to avoid significant economic losses. The aim of this work is to evaluate the effect on mechanical response of hydrogen charged AISI 316L stainless steel samples. To achieve homogeneous carbides precipitation, specific thermal treatments were conducted on as-received samples. Then three sets of samples were considered to carry out tensile tests. Before that, a group of heat-treated samples were hydrogen charged, in a 1N H2SO4 electrolytic solution with 0.25 g/L NaAsO2 as hydrogen promoter agent, using graphite anode and a constant current density of 35 mA/cm2 for 3.5 h. After tensile tests, the resulting fracture surfaces exhibited mixed ductile-brittle behavior in hydrogen charged samples in comparison with the ductile morphology obtained in uncharged ones. In addition, in hydrogenated samples cracks were found associated with fine chromium carbides, while ductile well-developed dimples were found in uncharged samples. In coincidence, there was a ductility loss in electrolytic hydrogen charged samples, which was not observed in those uncharged ones. In order to identify hydrogen - carbides interactions, a selective metallographic technique made it possible to find grain boundaries and carbides/matrix interfaces as the main hydrogen traps. Furthermore, differential scanning calorimetry (DSC) tests were performed to obtain hydrogen desorption temperatures. Results allowed to settle that those carbides developed during thermal treatments are responsible for deleterious hydrogen trapping that may cause mechanical failure on AISI 316L stainless steel. |
| publishDate |
2022 |
| dc.date.none.fl_str_mv |
2022-05-13 2024-12-03T12:21:35Z |
| dc.type.none.fl_str_mv |
info:eu-repo/semantics/conferenceObject info:eu-repo/semantics/acceptedVersion http://purl.org/coar/resource_type/c_5794 info:ar-repo/semantics/documentoDeConferencia |
| format |
conferenceObject |
| status_str |
acceptedVersion |
| dc.identifier.none.fl_str_mv |
https://www.alliedacademies.org/proceedings/hydrogen-incidence-on-tensile-strength-behavior-of-aisi-316l-stainless-steel-6885.html https://ria.utn.edu.ar/handle/20.500.12272/11742 |
| url |
https://www.alliedacademies.org/proceedings/hydrogen-incidence-on-tensile-strength-behavior-of-aisi-316l-stainless-steel-6885.html https://ria.utn.edu.ar/handle/20.500.12272/11742 |
| dc.language.none.fl_str_mv |
eng |
| language |
eng |
| dc.rights.none.fl_str_mv |
info:eu-repo/semantics/openAccess Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/ Licencia Creative Commons |
| eu_rights_str_mv |
openAccess |
| rights_invalid_str_mv |
Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/ Licencia Creative Commons |
| dc.format.none.fl_str_mv |
pdf application/pdf |
| dc.source.none.fl_str_mv |
reponame:Repositorio Institucional Abierto (UTN) instname:Universidad Tecnológica Nacional |
| reponame_str |
Repositorio Institucional Abierto (UTN) |
| collection |
Repositorio Institucional Abierto (UTN) |
| instname_str |
Universidad Tecnológica Nacional |
| repository.name.fl_str_mv |
Repositorio Institucional Abierto (UTN) - Universidad Tecnológica Nacional |
| repository.mail.fl_str_mv |
gestionria@rec.utn.edu.ar; fsuarez@rec.utn.edu.ar |
| _version_ |
1880396302963965952 |
| score |
13.334379 |