Synthesis, characterization and catalytic performance of bimetallic Ir-Pt catalysts for tetralin hydrogenation

Autores
Vallés, Verónica; Ledesma, Brenda; Rivoira, Lorena Paola; Cussa, Jorgelina; Martínez, María Laura; Anunziata, Oscar Alfredo; Beltramone, Andrea Raquel
Año de publicación
2014
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
Bimetallic Pt–Pd catalysts have received considerable attention, because they show high activity in a variety of catalytic applications (1) and stability compared with monometallic Pt or Pd catalysts. For instance, the bimetallic Pt–Pd catalysts have been shown to have higher resistance toward poisonscompared to Pt catalysts (2-4). For supported bimetallic clusters, the surface and bulk composition strongly depend on a series of parameters, for example, preparation procedures, metal–metal and metal–support interactions. The final goal is to find the optimal proportion of each metal in order to be more active in these processes.In this case a series of Ir and Pt modified SBA-15 were prepared by the consecutive wet impregnation method, with different content of each metal. The final catalysts were characterized by XRD, TEM and H2 chemisorption to study the effect of content of metal on the dispersion of iridium/platinum. The catalysts synthesized with similar percentage of both metal showed the best activity measured in tetralin hydrogenation. Platinum (Pt) and Iridium (Ir) nanoparticles were incorporated into SBA-15 support [1-4] by the wet co-impregnation method. The metal precursors were Iridium acetylacetonate and cloroplatinic acid. The samples were calcined at 500°C and previous to the catalytic test the samples were reduced by heating at 2°C/min to 450°C in a H2 stream for 5 h. Hereinafter this catalyst will be referred as Ir-Pt- SBA-15 (x), with x= 1-3. The catalytic activity was measured in a 4563Parr reactor, at 250°C, 15 atm of pressure of hydrogen and 360 rpm for tetralin hydrogenation (feed consisted in 50 mL of 5% v/v of tetralin (98.5% FLUKA) in Dodecane). The Pt-Ir-SBA-15 catalyst with 1 %wt. of each metals had the highest activity measured in tetralin hydrogenation at mild conditions. The good activity was correlated with higher Ir/Pt dispersion on SBA-15 mesostructured material used as support, as we seen by TEM and H2 Chemisorption, with higher active metal sites exposed to reactant. The Ir-Pt-SBA-15 activity is sufficiently high to envisage use in the final stages of a refinery process producing diesel fuel of high Cetane Number by hydrodearomatization.
Fil: Vallés, Verónica. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.
Fil: Ledesma, Brenda. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.
Fil: Rivoira, Lorena Paola. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.
Fil: Cussa, Jorgelina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.
Fil: Martínez, María Laura. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.
Fil: Anunziata, Oscar Alfredo. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.
Fil: Beltramone, Andrea Raquel. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.
Peer Reviewed
Materia
Iridium-platinum containing SBA-15
Hydrogenation
TEM
Nivel de accesibilidad
acceso abierto
Condiciones de uso
2024-03-25T22:40:25Z
Repositorio
Repositorio Institucional Abierto (UTN)
Institución
Universidad Tecnológica Nacional
OAI Identificador
oai:ria.utn.edu.ar:20.500.12272/10079
Acceder
id RIAUTN_ca4c4b1f5e4c59af140e87ddec3590f4
oai_identifier_str oai:ria.utn.edu.ar:20.500.12272/10079
network_acronym_str RIAUTN
repository_id_str a
network_name_str Repositorio Institucional Abierto (UTN)
spelling Synthesis, characterization and catalytic performance of bimetallic Ir-Pt catalysts for tetralin hydrogenationVallés, VerónicaLedesma, BrendaRivoira, Lorena PaolaCussa, JorgelinaMartínez, María LauraAnunziata, Oscar AlfredoBeltramone, Andrea RaquelIridium-platinum containing SBA-15HydrogenationTEMBimetallic Pt–Pd catalysts have received considerable attention, because they show high activity in a variety of catalytic applications (1) and stability compared with monometallic Pt or Pd catalysts. For instance, the bimetallic Pt–Pd catalysts have been shown to have higher resistance toward poisonscompared to Pt catalysts (2-4). For supported bimetallic clusters, the surface and bulk composition strongly depend on a series of parameters, for example, preparation procedures, metal–metal and metal–support interactions. The final goal is to find the optimal proportion of each metal in order to be more active in these processes.In this case a series of Ir and Pt modified SBA-15 were prepared by the consecutive wet impregnation method, with different content of each metal. The final catalysts were characterized by XRD, TEM and H2 chemisorption to study the effect of content of metal on the dispersion of iridium/platinum. The catalysts synthesized with similar percentage of both metal showed the best activity measured in tetralin hydrogenation. Platinum (Pt) and Iridium (Ir) nanoparticles were incorporated into SBA-15 support [1-4] by the wet co-impregnation method. The metal precursors were Iridium acetylacetonate and cloroplatinic acid. The samples were calcined at 500°C and previous to the catalytic test the samples were reduced by heating at 2°C/min to 450°C in a H2 stream for 5 h. Hereinafter this catalyst will be referred as Ir-Pt- SBA-15 (x), with x= 1-3. The catalytic activity was measured in a 4563Parr reactor, at 250°C, 15 atm of pressure of hydrogen and 360 rpm for tetralin hydrogenation (feed consisted in 50 mL of 5% v/v of tetralin (98.5% FLUKA) in Dodecane). The Pt-Ir-SBA-15 catalyst with 1 %wt. of each metals had the highest activity measured in tetralin hydrogenation at mild conditions. The good activity was correlated with higher Ir/Pt dispersion on SBA-15 mesostructured material used as support, as we seen by TEM and H2 Chemisorption, with higher active metal sites exposed to reactant. The Ir-Pt-SBA-15 activity is sufficiently high to envisage use in the final stages of a refinery process producing diesel fuel of high Cetane Number by hydrodearomatization.Fil: Vallés, Verónica. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.Fil: Ledesma, Brenda. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.Fil: Rivoira, Lorena Paola. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.Fil: Cussa, Jorgelina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.Fil: Martínez, María Laura. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.Fil: Anunziata, Oscar Alfredo. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.Fil: Beltramone, Andrea Raquel. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.Peer Reviewed2024-03-25T22:40:25Z2024-03-25T22:40:25Z2014info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articulopdfapplication/pdfhttp://hdl.handle.net/20.500.12272/10079-enginfo:eu-repo/semantics/openAccess2024-03-25T22:40:25Zhttp://creativecommons.org/licenses/by-nc-nd/4.0/Attribution-NonCommercial-NoDerivatives 4.0 InternacionalBeltramone, Andrea Raquel_X_Atribución (Attribution): En cualquier explotación de la obra autorizada por la licencia será necesario reconocer la autoría (obligatoria en todos los casos). _X_No comercial (Non Commercial): La explotación de la obra queda limitada a usos no comerciales. _X_Sin obras derivadas (No Derivate Works): La autorización para explotar la obra no incluye la posibilidad de crear una obra derivada (traducciones, adaptaciones, etc.). _X_Compartir igual (Share Alike): La explotación autorizada incluye la creación de obras derivadas siempre que se mantenga la misma licencia al ser divulgadas.reponame:Repositorio Institucional Abierto (UTN)instname:Universidad Tecnológica Nacional2026-09-24T12:46:39Zoai:ria.utn.edu.ar:20.500.12272/10079instacron:UTNInstitucionalhttp://ria.utn.edu.ar/Universidad públicaNo correspondehttp://ria.utn.edu.ar/oaigestionria@rec.utn.edu.ar; fsuarez@rec.utn.edu.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:a2026-09-24 12:46:40.372Repositorio Institucional Abierto (UTN) - Universidad Tecnológica Nacionalfalse
dc.title.none.fl_str_mv Synthesis, characterization and catalytic performance of bimetallic Ir-Pt catalysts for tetralin hydrogenation
title Synthesis, characterization and catalytic performance of bimetallic Ir-Pt catalysts for tetralin hydrogenation
spellingShingle Synthesis, characterization and catalytic performance of bimetallic Ir-Pt catalysts for tetralin hydrogenation
Vallés, Verónica
Iridium-platinum containing SBA-15
Hydrogenation
TEM
title_short Synthesis, characterization and catalytic performance of bimetallic Ir-Pt catalysts for tetralin hydrogenation
title_full Synthesis, characterization and catalytic performance of bimetallic Ir-Pt catalysts for tetralin hydrogenation
title_fullStr Synthesis, characterization and catalytic performance of bimetallic Ir-Pt catalysts for tetralin hydrogenation
title_full_unstemmed Synthesis, characterization and catalytic performance of bimetallic Ir-Pt catalysts for tetralin hydrogenation
title_sort Synthesis, characterization and catalytic performance of bimetallic Ir-Pt catalysts for tetralin hydrogenation
dc.creator.none.fl_str_mv Vallés, Verónica
Ledesma, Brenda
Rivoira, Lorena Paola
Cussa, Jorgelina
Martínez, María Laura
Anunziata, Oscar Alfredo
Beltramone, Andrea Raquel
author Vallés, Verónica
author_facet Vallés, Verónica
Ledesma, Brenda
Rivoira, Lorena Paola
Cussa, Jorgelina
Martínez, María Laura
Anunziata, Oscar Alfredo
Beltramone, Andrea Raquel
author_role author
author2 Ledesma, Brenda
Rivoira, Lorena Paola
Cussa, Jorgelina
Martínez, María Laura
Anunziata, Oscar Alfredo
Beltramone, Andrea Raquel
author2_role author
author
author
author
author
author
dc.subject.none.fl_str_mv Iridium-platinum containing SBA-15
Hydrogenation
TEM
topic Iridium-platinum containing SBA-15
Hydrogenation
TEM
dc.description.none.fl_txt_mv Bimetallic Pt–Pd catalysts have received considerable attention, because they show high activity in a variety of catalytic applications (1) and stability compared with monometallic Pt or Pd catalysts. For instance, the bimetallic Pt–Pd catalysts have been shown to have higher resistance toward poisonscompared to Pt catalysts (2-4). For supported bimetallic clusters, the surface and bulk composition strongly depend on a series of parameters, for example, preparation procedures, metal–metal and metal–support interactions. The final goal is to find the optimal proportion of each metal in order to be more active in these processes.In this case a series of Ir and Pt modified SBA-15 were prepared by the consecutive wet impregnation method, with different content of each metal. The final catalysts were characterized by XRD, TEM and H2 chemisorption to study the effect of content of metal on the dispersion of iridium/platinum. The catalysts synthesized with similar percentage of both metal showed the best activity measured in tetralin hydrogenation. Platinum (Pt) and Iridium (Ir) nanoparticles were incorporated into SBA-15 support [1-4] by the wet co-impregnation method. The metal precursors were Iridium acetylacetonate and cloroplatinic acid. The samples were calcined at 500°C and previous to the catalytic test the samples were reduced by heating at 2°C/min to 450°C in a H2 stream for 5 h. Hereinafter this catalyst will be referred as Ir-Pt- SBA-15 (x), with x= 1-3. The catalytic activity was measured in a 4563Parr reactor, at 250°C, 15 atm of pressure of hydrogen and 360 rpm for tetralin hydrogenation (feed consisted in 50 mL of 5% v/v of tetralin (98.5% FLUKA) in Dodecane). The Pt-Ir-SBA-15 catalyst with 1 %wt. of each metals had the highest activity measured in tetralin hydrogenation at mild conditions. The good activity was correlated with higher Ir/Pt dispersion on SBA-15 mesostructured material used as support, as we seen by TEM and H2 Chemisorption, with higher active metal sites exposed to reactant. The Ir-Pt-SBA-15 activity is sufficiently high to envisage use in the final stages of a refinery process producing diesel fuel of high Cetane Number by hydrodearomatization.
Fil: Vallés, Verónica. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.
Fil: Ledesma, Brenda. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.
Fil: Rivoira, Lorena Paola. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.
Fil: Cussa, Jorgelina. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.
Fil: Martínez, María Laura. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.
Fil: Anunziata, Oscar Alfredo. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.
Fil: Beltramone, Andrea Raquel. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación en Nanociencia y Nanotecnología; Argentina.
Peer Reviewed
description Bimetallic Pt–Pd catalysts have received considerable attention, because they show high activity in a variety of catalytic applications (1) and stability compared with monometallic Pt or Pd catalysts. For instance, the bimetallic Pt–Pd catalysts have been shown to have higher resistance toward poisonscompared to Pt catalysts (2-4). For supported bimetallic clusters, the surface and bulk composition strongly depend on a series of parameters, for example, preparation procedures, metal–metal and metal–support interactions. The final goal is to find the optimal proportion of each metal in order to be more active in these processes.In this case a series of Ir and Pt modified SBA-15 were prepared by the consecutive wet impregnation method, with different content of each metal. The final catalysts were characterized by XRD, TEM and H2 chemisorption to study the effect of content of metal on the dispersion of iridium/platinum. The catalysts synthesized with similar percentage of both metal showed the best activity measured in tetralin hydrogenation. Platinum (Pt) and Iridium (Ir) nanoparticles were incorporated into SBA-15 support [1-4] by the wet co-impregnation method. The metal precursors were Iridium acetylacetonate and cloroplatinic acid. The samples were calcined at 500°C and previous to the catalytic test the samples were reduced by heating at 2°C/min to 450°C in a H2 stream for 5 h. Hereinafter this catalyst will be referred as Ir-Pt- SBA-15 (x), with x= 1-3. The catalytic activity was measured in a 4563Parr reactor, at 250°C, 15 atm of pressure of hydrogen and 360 rpm for tetralin hydrogenation (feed consisted in 50 mL of 5% v/v of tetralin (98.5% FLUKA) in Dodecane). The Pt-Ir-SBA-15 catalyst with 1 %wt. of each metals had the highest activity measured in tetralin hydrogenation at mild conditions. The good activity was correlated with higher Ir/Pt dispersion on SBA-15 mesostructured material used as support, as we seen by TEM and H2 Chemisorption, with higher active metal sites exposed to reactant. The Ir-Pt-SBA-15 activity is sufficiently high to envisage use in the final stages of a refinery process producing diesel fuel of high Cetane Number by hydrodearomatization.
publishDate 2014
dc.date.none.fl_str_mv 2014
2024-03-25T22:40:25Z
2024-03-25T22:40:25Z
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv http://hdl.handle.net/20.500.12272/10079
-
url http://hdl.handle.net/20.500.12272/10079
identifier_str_mv -
dc.language.none.fl_str_mv eng
language eng
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
2024-03-25T22:40:25Z
http://creativecommons.org/licenses/by-nc-nd/4.0/
Attribution-NonCommercial-NoDerivatives 4.0 Internacional
Beltramone, Andrea Raquel
_X_Atribución (Attribution): En cualquier explotación de la obra autorizada por la licencia será necesario reconocer la autoría (obligatoria en todos los casos). _X_No comercial (Non Commercial): La explotación de la obra queda limitada a usos no comerciales. _X_Sin obras derivadas (No Derivate Works): La autorización para explotar la obra no incluye la posibilidad de crear una obra derivada (traducciones, adaptaciones, etc.). _X_Compartir igual (Share Alike): La explotación autorizada incluye la creación de obras derivadas siempre que se mantenga la misma licencia al ser divulgadas.
eu_rights_str_mv openAccess
rights_invalid_str_mv 2024-03-25T22:40:25Z
http://creativecommons.org/licenses/by-nc-nd/4.0/
Attribution-NonCommercial-NoDerivatives 4.0 Internacional
Beltramone, Andrea Raquel
_X_Atribución (Attribution): En cualquier explotación de la obra autorizada por la licencia será necesario reconocer la autoría (obligatoria en todos los casos). _X_No comercial (Non Commercial): La explotación de la obra queda limitada a usos no comerciales. _X_Sin obras derivadas (No Derivate Works): La autorización para explotar la obra no incluye la posibilidad de crear una obra derivada (traducciones, adaptaciones, etc.). _X_Compartir igual (Share Alike): La explotación autorizada incluye la creación de obras derivadas siempre que se mantenga la misma licencia al ser divulgadas.
dc.format.none.fl_str_mv pdf
application/pdf
dc.source.none.fl_str_mv reponame:Repositorio Institucional Abierto (UTN)
instname:Universidad Tecnológica Nacional
reponame_str Repositorio Institucional Abierto (UTN)
collection Repositorio Institucional Abierto (UTN)
instname_str Universidad Tecnológica Nacional
repository.name.fl_str_mv Repositorio Institucional Abierto (UTN) - Universidad Tecnológica Nacional
repository.mail.fl_str_mv gestionria@rec.utn.edu.ar; fsuarez@rec.utn.edu.ar
_version_ 1877230927376023552
score 13.24418

Publicaciones similares