Effect of zeolite matrix over products distribution of catalytic pyrolysis of biomass waste

Autores
Fermanelli, Carla S.; Diguilio, Eliana; Saux, Clara; Pierella, Liliana Beatriz
Año de publicación
2018
Idioma
inglés
Tipo de recurso
documento de conferencia
Estado
versión publicada
Descripción
Thermo-chemical conversion of biomass has become a promising technology for fuel and platform molecules production. In Argentina, peanut (Arachis hipogaea) industry leaves about 200,000 tons of biomass waste per year, all concentrated in the central area of the country causing serious environmental issues. In this sense, pyrolysis (thermochemical process in absence of oxygen) is an adequate technique to process rich in lignin materials. Three types of zeolites, namely ZSM-11, Beta and Y have been tested as heterogeneous catalysts in biomass pyrolysis in order to evaluate the effect of the zeolite type over bio-oil yield and products selectivity. While ZSM-11 and Beta zeolites were obtained by the traditional hydrothermal crystallization method1,2 Y zeolite was commercially acquired from Sigma Aldrich. The formers, after synthesized were finally exchanged with NH4Cl solution, desorbed in N2 flow and further calcined at 500 °C to obtain the protonic forms. The catalysts were named H-ZSM-11, H-Beta and H-Y. Fresh and used materials were widely characterized by XRD, FTIR, ICP and BET techniques. Peanut shells provided by “Lorenzati, Ruetsch y Cia” (Ticino, Córdoba, Argentina) were washed, grinded and sieved to obtain particle size less than 3.35 mm (ASTM E-11/95) prior to be evaluated. Grinding diminishes heat transfer problems associated with solids3. Pyrolysis reactions were done in a quartz fixed bed reactor (23 mm I.D., 290 mm length) at 500 °C under 60 mL/min of N2 flow for 10 min. Biomass was located in a porous base glass basket inside the reactor and over the catalyst bed. Condensable products were collected in a liquid trap submerged in a refrigerant bath (-15°C) and further analyzed and quantified by GC and GC/MS. Both catalytic and non-catalytic runs were performed for comparison purpose. Three different products are obtained from the pyrolysis process, called: bio-oil, bio-gas and bio-char. In terms of products yields, while bio-char yield was similar in the three cases studied, bio-oil yield varied in the range of 30-50%. The maximum throughput was achieved with H-ZSM-11 zeolite and the minimum was observed when H-Y catalyst was the one utilized. Bio-gas yield was comparable in the cases of H-ZSM-11 and H-Beta (around 20%), but it was much higher with H-Y zeolite. This result indicates that H-Y matrix produces higher cracking of the organic molecules after pyrolysis. Higher concentration of desired products namely, toluene, furfural, xylene, 5-hydroxymethyl furfural (5-HMF), and trimethyl benzene (TMB), among others was observed when H-ZSM-11 catalyst was employed. Moreover, selectivity towards xylene and 5-HMF was 10% and 5% respectively, compared to the 1.5% reached when H-Beta zeolite was used and 0% with H-Y. The use of zeolites in biomass pyrolysis is beneficial for interesting chemical production, particularly H-ZSM-11 zeolite. This catalyst has proven to generate not only higher bio-oil yields than the others studied, but also a liquid with higher concentration of desired products.
Fil: Fermanelli, Carla S. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación y Tecnología Química. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina.
Fil: Diguilio, Eliana. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación y Tecnología Química. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina.
Fil: Saux, Clara. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación y Tecnología Química. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina.
Fil: Pierella, Liliana Beatriz. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación y Tecnología Química. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina.
Materia
Peanut shell
Valorization
Pyrolysis
Zeolites
Nivel de accesibilidad
acceso abierto
Condiciones de uso
2022-05-20T22:06:59Z
Repositorio
Repositorio Institucional Abierto (UTN)
Institución
Universidad Tecnológica Nacional
OAI Identificador
oai:ria.utn.edu.ar:20.500.12272/6394

id RIAUTN_e4757afadc550854ea734340753bedba
oai_identifier_str oai:ria.utn.edu.ar:20.500.12272/6394
network_acronym_str RIAUTN
repository_id_str a
network_name_str Repositorio Institucional Abierto (UTN)
spelling Effect of zeolite matrix over products distribution of catalytic pyrolysis of biomass wasteFermanelli, Carla S.Diguilio, ElianaSaux, ClaraPierella, Liliana BeatrizPeanut shellValorizationPyrolysisZeolitesThermo-chemical conversion of biomass has become a promising technology for fuel and platform molecules production. In Argentina, peanut (Arachis hipogaea) industry leaves about 200,000 tons of biomass waste per year, all concentrated in the central area of the country causing serious environmental issues. In this sense, pyrolysis (thermochemical process in absence of oxygen) is an adequate technique to process rich in lignin materials. Three types of zeolites, namely ZSM-11, Beta and Y have been tested as heterogeneous catalysts in biomass pyrolysis in order to evaluate the effect of the zeolite type over bio-oil yield and products selectivity. While ZSM-11 and Beta zeolites were obtained by the traditional hydrothermal crystallization method1,2 Y zeolite was commercially acquired from Sigma Aldrich. The formers, after synthesized were finally exchanged with NH4Cl solution, desorbed in N2 flow and further calcined at 500 °C to obtain the protonic forms. The catalysts were named H-ZSM-11, H-Beta and H-Y. Fresh and used materials were widely characterized by XRD, FTIR, ICP and BET techniques. Peanut shells provided by “Lorenzati, Ruetsch y Cia” (Ticino, Córdoba, Argentina) were washed, grinded and sieved to obtain particle size less than 3.35 mm (ASTM E-11/95) prior to be evaluated. Grinding diminishes heat transfer problems associated with solids3. Pyrolysis reactions were done in a quartz fixed bed reactor (23 mm I.D., 290 mm length) at 500 °C under 60 mL/min of N2 flow for 10 min. Biomass was located in a porous base glass basket inside the reactor and over the catalyst bed. Condensable products were collected in a liquid trap submerged in a refrigerant bath (-15°C) and further analyzed and quantified by GC and GC/MS. Both catalytic and non-catalytic runs were performed for comparison purpose. Three different products are obtained from the pyrolysis process, called: bio-oil, bio-gas and bio-char. In terms of products yields, while bio-char yield was similar in the three cases studied, bio-oil yield varied in the range of 30-50%. The maximum throughput was achieved with H-ZSM-11 zeolite and the minimum was observed when H-Y catalyst was the one utilized. Bio-gas yield was comparable in the cases of H-ZSM-11 and H-Beta (around 20%), but it was much higher with H-Y zeolite. This result indicates that H-Y matrix produces higher cracking of the organic molecules after pyrolysis. Higher concentration of desired products namely, toluene, furfural, xylene, 5-hydroxymethyl furfural (5-HMF), and trimethyl benzene (TMB), among others was observed when H-ZSM-11 catalyst was employed. Moreover, selectivity towards xylene and 5-HMF was 10% and 5% respectively, compared to the 1.5% reached when H-Beta zeolite was used and 0% with H-Y. The use of zeolites in biomass pyrolysis is beneficial for interesting chemical production, particularly H-ZSM-11 zeolite. This catalyst has proven to generate not only higher bio-oil yields than the others studied, but also a liquid with higher concentration of desired products.Fil: Fermanelli, Carla S. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación y Tecnología Química. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina.Fil: Diguilio, Eliana. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación y Tecnología Química. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina.Fil: Saux, Clara. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación y Tecnología Química. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina.Fil: Pierella, Liliana Beatriz. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación y Tecnología Química. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina.2022-05-20T22:06:59Z2022-05-20T22:06:59Z2018info:eu-repo/semantics/conferenceObjectinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_5794info:ar-repo/semantics/documentoDeConferenciapdfapplication/pdf: VI San Luis School and Conference of Surfaces, Interfaces and Catalysis (2018).http://hdl.handle.net/20.500.12272/6394enginfo:eu-repo/semantics/openAccess2022-05-20T22:06:59Zhttp://creativecommons.org/licenses/by-nc-nd/4.0/Attribution-NonCommercial-NoDerivatives 4.0 InternacionalPierella, Liliana BeatrizNo comercial. Sólo de uso académico.reponame:Repositorio Institucional Abierto (UTN)instname:Universidad Tecnológica Nacional2026-10-29T11:27:17Zoai:ria.utn.edu.ar:20.500.12272/6394instacron:UTNInstitucionalhttp://ria.utn.edu.ar/Universidad públicaNo correspondehttp://ria.utn.edu.ar/oaigestionria@rec.utn.edu.ar; fsuarez@rec.utn.edu.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:a2026-10-29 11:27:18.04Repositorio Institucional Abierto (UTN) - Universidad Tecnológica Nacionalfalse
dc.title.none.fl_str_mv Effect of zeolite matrix over products distribution of catalytic pyrolysis of biomass waste
title Effect of zeolite matrix over products distribution of catalytic pyrolysis of biomass waste
spellingShingle Effect of zeolite matrix over products distribution of catalytic pyrolysis of biomass waste
Fermanelli, Carla S.
Peanut shell
Valorization
Pyrolysis
Zeolites
title_short Effect of zeolite matrix over products distribution of catalytic pyrolysis of biomass waste
title_full Effect of zeolite matrix over products distribution of catalytic pyrolysis of biomass waste
title_fullStr Effect of zeolite matrix over products distribution of catalytic pyrolysis of biomass waste
title_full_unstemmed Effect of zeolite matrix over products distribution of catalytic pyrolysis of biomass waste
title_sort Effect of zeolite matrix over products distribution of catalytic pyrolysis of biomass waste
dc.creator.none.fl_str_mv Fermanelli, Carla S.
Diguilio, Eliana
Saux, Clara
Pierella, Liliana Beatriz
author Fermanelli, Carla S.
author_facet Fermanelli, Carla S.
Diguilio, Eliana
Saux, Clara
Pierella, Liliana Beatriz
author_role author
author2 Diguilio, Eliana
Saux, Clara
Pierella, Liliana Beatriz
author2_role author
author
author
dc.subject.none.fl_str_mv Peanut shell
Valorization
Pyrolysis
Zeolites
topic Peanut shell
Valorization
Pyrolysis
Zeolites
dc.description.none.fl_txt_mv Thermo-chemical conversion of biomass has become a promising technology for fuel and platform molecules production. In Argentina, peanut (Arachis hipogaea) industry leaves about 200,000 tons of biomass waste per year, all concentrated in the central area of the country causing serious environmental issues. In this sense, pyrolysis (thermochemical process in absence of oxygen) is an adequate technique to process rich in lignin materials. Three types of zeolites, namely ZSM-11, Beta and Y have been tested as heterogeneous catalysts in biomass pyrolysis in order to evaluate the effect of the zeolite type over bio-oil yield and products selectivity. While ZSM-11 and Beta zeolites were obtained by the traditional hydrothermal crystallization method1,2 Y zeolite was commercially acquired from Sigma Aldrich. The formers, after synthesized were finally exchanged with NH4Cl solution, desorbed in N2 flow and further calcined at 500 °C to obtain the protonic forms. The catalysts were named H-ZSM-11, H-Beta and H-Y. Fresh and used materials were widely characterized by XRD, FTIR, ICP and BET techniques. Peanut shells provided by “Lorenzati, Ruetsch y Cia” (Ticino, Córdoba, Argentina) were washed, grinded and sieved to obtain particle size less than 3.35 mm (ASTM E-11/95) prior to be evaluated. Grinding diminishes heat transfer problems associated with solids3. Pyrolysis reactions were done in a quartz fixed bed reactor (23 mm I.D., 290 mm length) at 500 °C under 60 mL/min of N2 flow for 10 min. Biomass was located in a porous base glass basket inside the reactor and over the catalyst bed. Condensable products were collected in a liquid trap submerged in a refrigerant bath (-15°C) and further analyzed and quantified by GC and GC/MS. Both catalytic and non-catalytic runs were performed for comparison purpose. Three different products are obtained from the pyrolysis process, called: bio-oil, bio-gas and bio-char. In terms of products yields, while bio-char yield was similar in the three cases studied, bio-oil yield varied in the range of 30-50%. The maximum throughput was achieved with H-ZSM-11 zeolite and the minimum was observed when H-Y catalyst was the one utilized. Bio-gas yield was comparable in the cases of H-ZSM-11 and H-Beta (around 20%), but it was much higher with H-Y zeolite. This result indicates that H-Y matrix produces higher cracking of the organic molecules after pyrolysis. Higher concentration of desired products namely, toluene, furfural, xylene, 5-hydroxymethyl furfural (5-HMF), and trimethyl benzene (TMB), among others was observed when H-ZSM-11 catalyst was employed. Moreover, selectivity towards xylene and 5-HMF was 10% and 5% respectively, compared to the 1.5% reached when H-Beta zeolite was used and 0% with H-Y. The use of zeolites in biomass pyrolysis is beneficial for interesting chemical production, particularly H-ZSM-11 zeolite. This catalyst has proven to generate not only higher bio-oil yields than the others studied, but also a liquid with higher concentration of desired products.
Fil: Fermanelli, Carla S. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación y Tecnología Química. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina.
Fil: Diguilio, Eliana. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación y Tecnología Química. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina.
Fil: Saux, Clara. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación y Tecnología Química. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina.
Fil: Pierella, Liliana Beatriz. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación y Tecnología Química. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina.
description Thermo-chemical conversion of biomass has become a promising technology for fuel and platform molecules production. In Argentina, peanut (Arachis hipogaea) industry leaves about 200,000 tons of biomass waste per year, all concentrated in the central area of the country causing serious environmental issues. In this sense, pyrolysis (thermochemical process in absence of oxygen) is an adequate technique to process rich in lignin materials. Three types of zeolites, namely ZSM-11, Beta and Y have been tested as heterogeneous catalysts in biomass pyrolysis in order to evaluate the effect of the zeolite type over bio-oil yield and products selectivity. While ZSM-11 and Beta zeolites were obtained by the traditional hydrothermal crystallization method1,2 Y zeolite was commercially acquired from Sigma Aldrich. The formers, after synthesized were finally exchanged with NH4Cl solution, desorbed in N2 flow and further calcined at 500 °C to obtain the protonic forms. The catalysts were named H-ZSM-11, H-Beta and H-Y. Fresh and used materials were widely characterized by XRD, FTIR, ICP and BET techniques. Peanut shells provided by “Lorenzati, Ruetsch y Cia” (Ticino, Córdoba, Argentina) were washed, grinded and sieved to obtain particle size less than 3.35 mm (ASTM E-11/95) prior to be evaluated. Grinding diminishes heat transfer problems associated with solids3. Pyrolysis reactions were done in a quartz fixed bed reactor (23 mm I.D., 290 mm length) at 500 °C under 60 mL/min of N2 flow for 10 min. Biomass was located in a porous base glass basket inside the reactor and over the catalyst bed. Condensable products were collected in a liquid trap submerged in a refrigerant bath (-15°C) and further analyzed and quantified by GC and GC/MS. Both catalytic and non-catalytic runs were performed for comparison purpose. Three different products are obtained from the pyrolysis process, called: bio-oil, bio-gas and bio-char. In terms of products yields, while bio-char yield was similar in the three cases studied, bio-oil yield varied in the range of 30-50%. The maximum throughput was achieved with H-ZSM-11 zeolite and the minimum was observed when H-Y catalyst was the one utilized. Bio-gas yield was comparable in the cases of H-ZSM-11 and H-Beta (around 20%), but it was much higher with H-Y zeolite. This result indicates that H-Y matrix produces higher cracking of the organic molecules after pyrolysis. Higher concentration of desired products namely, toluene, furfural, xylene, 5-hydroxymethyl furfural (5-HMF), and trimethyl benzene (TMB), among others was observed when H-ZSM-11 catalyst was employed. Moreover, selectivity towards xylene and 5-HMF was 10% and 5% respectively, compared to the 1.5% reached when H-Beta zeolite was used and 0% with H-Y. The use of zeolites in biomass pyrolysis is beneficial for interesting chemical production, particularly H-ZSM-11 zeolite. This catalyst has proven to generate not only higher bio-oil yields than the others studied, but also a liquid with higher concentration of desired products.
publishDate 2018
dc.date.none.fl_str_mv 2018
2022-05-20T22:06:59Z
2022-05-20T22:06:59Z
dc.type.none.fl_str_mv info:eu-repo/semantics/conferenceObject
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_5794
info:ar-repo/semantics/documentoDeConferencia
format conferenceObject
status_str publishedVersion
dc.identifier.none.fl_str_mv : VI San Luis School and Conference of Surfaces, Interfaces and Catalysis (2018).
http://hdl.handle.net/20.500.12272/6394
identifier_str_mv : VI San Luis School and Conference of Surfaces, Interfaces and Catalysis (2018).
url http://hdl.handle.net/20.500.12272/6394
dc.language.none.fl_str_mv eng
language eng
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
2022-05-20T22:06:59Z
http://creativecommons.org/licenses/by-nc-nd/4.0/
Attribution-NonCommercial-NoDerivatives 4.0 Internacional
Pierella, Liliana Beatriz
No comercial. Sólo de uso académico.
eu_rights_str_mv openAccess
rights_invalid_str_mv 2022-05-20T22:06:59Z
http://creativecommons.org/licenses/by-nc-nd/4.0/
Attribution-NonCommercial-NoDerivatives 4.0 Internacional
Pierella, Liliana Beatriz
No comercial. Sólo de uso académico.
dc.format.none.fl_str_mv pdf
application/pdf
dc.source.none.fl_str_mv reponame:Repositorio Institucional Abierto (UTN)
instname:Universidad Tecnológica Nacional
reponame_str Repositorio Institucional Abierto (UTN)
collection Repositorio Institucional Abierto (UTN)
instname_str Universidad Tecnológica Nacional
repository.name.fl_str_mv Repositorio Institucional Abierto (UTN) - Universidad Tecnológica Nacional
repository.mail.fl_str_mv gestionria@rec.utn.edu.ar; fsuarez@rec.utn.edu.ar
_version_ 1880396321526906880
score 13.334379