Dimensional characterization of large opaque samples and microdeformations by low coherence interferometry

Autores
Torga, Jorge Román; Morel, Eneas Nicolás; Russo, Nélida A.; Duchowicz, Ricardo
Año de publicación
2020
Idioma
inglés
Tipo de recurso
artículo
Estado
versión publicada
Descripción
We report on the application of an interferometric system based on the low-coherence interferometry technique to the dimensional characterization of large opaque mechanical parts as well as microdeformations experienced by them. The implemented scheme is capable of simultaneously measuring very small deformations and relatively large dimensions or thicknesses (several centimeters) of the sample. By applying the chirp Fourier transform algorithm, it was possible to measure changes in thickness with an uncertainty of 0.35  μm when a 7-cm-thick sample was measured. The measurement scheme was implemented in optical fiber, which makes it highly adaptable to industrial conditions. It employs a tunable light source and a Sagnac–Michelson configuration of the interferometric system that allows the thickness of the opaque sample and the topography of both faces to be obtained simultaneously. The developed system can be used to perform profilometry of opaque samples and to analyze the dimensional behavior of mechanical pieces in production lines or under mechanical efforts capable of introducing some deformations on them. This feature enables the system to perform quality control in manufacturing processes.
Fil: Torga, Jorge Román. Universidad Tecnológica Nacional. Facultad Regional Delta.; Argentina.
Fil: Morel, Eneas Nicolás. Universidad Tecnológica Nacional. Facultad Regional Delta.; Argentina.
Fil: Russo, Nélida A. Universidad Tecnológica Nacional. Facultad Regional Delta.; Argentina.
Fil: Duchowicz, Ricardo. Universidad Tecnológica Nacional. Facultad Regional Delta.; Argentina.
Peer Reviewed
Fuente
https://www.spiedigitallibrary.org/journals/Optical-Engineering/volume-59/issue-1/014112/Dimensional-characterization-of-large-opaque-samples-and-microdeformations-by-low/10.1117/1.OE.59.1.014112.short
Materia
UTN FRD
Low-coherence interferometry
Microdeformations
Fourier chirp algoritmo
Nivel de accesibilidad
acceso abierto
Condiciones de uso
2020-02-10T22:22:06Z
Repositorio
Repositorio Institucional Abierto (UTN)
Institución
Universidad Tecnológica Nacional
OAI Identificador
oai:ria.utn.edu.ar:20.500.12272/4283

id RIAUTN_e716d037a3981d9d16a8840f563a2310
oai_identifier_str oai:ria.utn.edu.ar:20.500.12272/4283
network_acronym_str RIAUTN
repository_id_str a
network_name_str Repositorio Institucional Abierto (UTN)
spelling Dimensional characterization of large opaque samples and microdeformations by low coherence interferometryTorga, Jorge RománMorel, Eneas NicolásRusso, Nélida A.Duchowicz, RicardoUTN FRDLow-coherence interferometryMicrodeformationsFourier chirp algoritmoWe report on the application of an interferometric system based on the low-coherence interferometry technique to the dimensional characterization of large opaque mechanical parts as well as microdeformations experienced by them. The implemented scheme is capable of simultaneously measuring very small deformations and relatively large dimensions or thicknesses (several centimeters) of the sample. By applying the chirp Fourier transform algorithm, it was possible to measure changes in thickness with an uncertainty of 0.35  μm when a 7-cm-thick sample was measured. The measurement scheme was implemented in optical fiber, which makes it highly adaptable to industrial conditions. It employs a tunable light source and a Sagnac–Michelson configuration of the interferometric system that allows the thickness of the opaque sample and the topography of both faces to be obtained simultaneously. The developed system can be used to perform profilometry of opaque samples and to analyze the dimensional behavior of mechanical pieces in production lines or under mechanical efforts capable of introducing some deformations on them. This feature enables the system to perform quality control in manufacturing processes.Fil: Torga, Jorge Román. Universidad Tecnológica Nacional. Facultad Regional Delta.; Argentina.Fil: Morel, Eneas Nicolás. Universidad Tecnológica Nacional. Facultad Regional Delta.; Argentina.Fil: Russo, Nélida A. Universidad Tecnológica Nacional. Facultad Regional Delta.; Argentina.Fil: Duchowicz, Ricardo. Universidad Tecnológica Nacional. Facultad Regional Delta.; Argentina.Peer Reviewed2020-02-10T22:22:06Z2020-02-10T22:22:06Z2020-01-25info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articuloapplication/pdfapplication/pdfDimensional characterization of large opaque samples and microdeformations by low coherence interferometry - Nélida A. Russo; Eneas N. Morel; Jorge R. Torga; Ricardo Duchowicz - Optical Engineering, 59(1), 014112 (2020). https://doi.org/10.1117/1.OE.59.1.014112 - 25 January 2020http://hdl.handle.net/20.500.12272/428310.1117/1.OE.59.1.014112https://www.spiedigitallibrary.org/journals/Optical-Engineering/volume-59/issue-1/014112/Dimensional-characterization-of-large-opaque-samples-and-microdeformations-by-low/10.1117/1.OE.59.1.014112.shortreponame:Repositorio Institucional Abierto (UTN)instname:Universidad Tecnológica Nacionalenginfo:eu-repo/semantics/openAccess2020-02-10T22:22:06Zhttp://creativecommons.org/licenses/by-nc-sa/4.0/Torga, Jorge RománAtribución - No Comercial - Compartir Igual (by-nc-sa)Atribución-NoComercial-CompartirIgual 4.0 Internacional2026-10-29T11:25:54Zoai:ria.utn.edu.ar:20.500.12272/4283instacron:UTNInstitucionalhttp://ria.utn.edu.ar/Universidad públicaNo correspondehttp://ria.utn.edu.ar/oaigestionria@rec.utn.edu.ar; fsuarez@rec.utn.edu.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:a2026-10-29 11:25:55.369Repositorio Institucional Abierto (UTN) - Universidad Tecnológica Nacionalfalse
dc.title.none.fl_str_mv Dimensional characterization of large opaque samples and microdeformations by low coherence interferometry
title Dimensional characterization of large opaque samples and microdeformations by low coherence interferometry
spellingShingle Dimensional characterization of large opaque samples and microdeformations by low coherence interferometry
Torga, Jorge Román
UTN FRD
Low-coherence interferometry
Microdeformations
Fourier chirp algoritmo
title_short Dimensional characterization of large opaque samples and microdeformations by low coherence interferometry
title_full Dimensional characterization of large opaque samples and microdeformations by low coherence interferometry
title_fullStr Dimensional characterization of large opaque samples and microdeformations by low coherence interferometry
title_full_unstemmed Dimensional characterization of large opaque samples and microdeformations by low coherence interferometry
title_sort Dimensional characterization of large opaque samples and microdeformations by low coherence interferometry
dc.creator.none.fl_str_mv Torga, Jorge Román
Morel, Eneas Nicolás
Russo, Nélida A.
Duchowicz, Ricardo
author Torga, Jorge Román
author_facet Torga, Jorge Román
Morel, Eneas Nicolás
Russo, Nélida A.
Duchowicz, Ricardo
author_role author
author2 Morel, Eneas Nicolás
Russo, Nélida A.
Duchowicz, Ricardo
author2_role author
author
author
dc.subject.none.fl_str_mv UTN FRD
Low-coherence interferometry
Microdeformations
Fourier chirp algoritmo
topic UTN FRD
Low-coherence interferometry
Microdeformations
Fourier chirp algoritmo
dc.description.none.fl_txt_mv We report on the application of an interferometric system based on the low-coherence interferometry technique to the dimensional characterization of large opaque mechanical parts as well as microdeformations experienced by them. The implemented scheme is capable of simultaneously measuring very small deformations and relatively large dimensions or thicknesses (several centimeters) of the sample. By applying the chirp Fourier transform algorithm, it was possible to measure changes in thickness with an uncertainty of 0.35  μm when a 7-cm-thick sample was measured. The measurement scheme was implemented in optical fiber, which makes it highly adaptable to industrial conditions. It employs a tunable light source and a Sagnac–Michelson configuration of the interferometric system that allows the thickness of the opaque sample and the topography of both faces to be obtained simultaneously. The developed system can be used to perform profilometry of opaque samples and to analyze the dimensional behavior of mechanical pieces in production lines or under mechanical efforts capable of introducing some deformations on them. This feature enables the system to perform quality control in manufacturing processes.
Fil: Torga, Jorge Román. Universidad Tecnológica Nacional. Facultad Regional Delta.; Argentina.
Fil: Morel, Eneas Nicolás. Universidad Tecnológica Nacional. Facultad Regional Delta.; Argentina.
Fil: Russo, Nélida A. Universidad Tecnológica Nacional. Facultad Regional Delta.; Argentina.
Fil: Duchowicz, Ricardo. Universidad Tecnológica Nacional. Facultad Regional Delta.; Argentina.
Peer Reviewed
description We report on the application of an interferometric system based on the low-coherence interferometry technique to the dimensional characterization of large opaque mechanical parts as well as microdeformations experienced by them. The implemented scheme is capable of simultaneously measuring very small deformations and relatively large dimensions or thicknesses (several centimeters) of the sample. By applying the chirp Fourier transform algorithm, it was possible to measure changes in thickness with an uncertainty of 0.35  μm when a 7-cm-thick sample was measured. The measurement scheme was implemented in optical fiber, which makes it highly adaptable to industrial conditions. It employs a tunable light source and a Sagnac–Michelson configuration of the interferometric system that allows the thickness of the opaque sample and the topography of both faces to be obtained simultaneously. The developed system can be used to perform profilometry of opaque samples and to analyze the dimensional behavior of mechanical pieces in production lines or under mechanical efforts capable of introducing some deformations on them. This feature enables the system to perform quality control in manufacturing processes.
publishDate 2020
dc.date.none.fl_str_mv 2020-02-10T22:22:06Z
2020-02-10T22:22:06Z
2020-01-25
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str publishedVersion
dc.identifier.none.fl_str_mv Dimensional characterization of large opaque samples and microdeformations by low coherence interferometry - Nélida A. Russo; Eneas N. Morel; Jorge R. Torga; Ricardo Duchowicz - Optical Engineering, 59(1), 014112 (2020). https://doi.org/10.1117/1.OE.59.1.014112 - 25 January 2020
http://hdl.handle.net/20.500.12272/4283
10.1117/1.OE.59.1.014112
identifier_str_mv Dimensional characterization of large opaque samples and microdeformations by low coherence interferometry - Nélida A. Russo; Eneas N. Morel; Jorge R. Torga; Ricardo Duchowicz - Optical Engineering, 59(1), 014112 (2020). https://doi.org/10.1117/1.OE.59.1.014112 - 25 January 2020
10.1117/1.OE.59.1.014112
url http://hdl.handle.net/20.500.12272/4283
dc.language.none.fl_str_mv eng
language eng
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
2020-02-10T22:22:06Z
http://creativecommons.org/licenses/by-nc-sa/4.0/
Torga, Jorge Román
Atribución - No Comercial - Compartir Igual (by-nc-sa)
Atribución-NoComercial-CompartirIgual 4.0 Internacional
eu_rights_str_mv openAccess
rights_invalid_str_mv 2020-02-10T22:22:06Z
http://creativecommons.org/licenses/by-nc-sa/4.0/
Torga, Jorge Román
Atribución - No Comercial - Compartir Igual (by-nc-sa)
Atribución-NoComercial-CompartirIgual 4.0 Internacional
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.source.none.fl_str_mv https://www.spiedigitallibrary.org/journals/Optical-Engineering/volume-59/issue-1/014112/Dimensional-characterization-of-large-opaque-samples-and-microdeformations-by-low/10.1117/1.OE.59.1.014112.short
reponame:Repositorio Institucional Abierto (UTN)
instname:Universidad Tecnológica Nacional
reponame_str Repositorio Institucional Abierto (UTN)
collection Repositorio Institucional Abierto (UTN)
instname_str Universidad Tecnológica Nacional
repository.name.fl_str_mv Repositorio Institucional Abierto (UTN) - Universidad Tecnológica Nacional
repository.mail.fl_str_mv gestionria@rec.utn.edu.ar; fsuarez@rec.utn.edu.ar
_version_ 1880396295817920512
score 13.334379