Sulfur elimination by ODSwith titanium-modified SBA-16.

Autores
Rivoira , Lorena Paola; Vallés , Verónica Alejandra; Ledesma , Brenda Cecilia; Martínez , María Laura; Anunziata , Oscar Alfredo; Beltramone, Andrea Raquel
Año de publicación
2015
Idioma
inglés
Tipo de recurso
artículo
Estado
versión aceptada
Descripción
Over the past, oxidative desulfurization (ODS) has drawn considerable interest as a new alter-native method for deep sulfur elimination from light oils. This can be attributed to its attractive properties, including lower temperature and pressure conditions and lower operating cost than conventional hydrodesulfurization (HDS) process. Oxidation of organosulfur compounds results in the formation of sulfoxides/sulfones, highly polar and hence easily removed by both extraction into polar solvents or by adsorption. Due to their low reactivity, dibenzothiophene derivatives (DBTs) are the most refractory species to be eliminated from oils. Hence, the ODS process through which DBTs are converted to their corresponding sulfones involves great interest at present. In this work, we describe the preparation and characterization of new mesoporous catalytic materials based on Ti-containing SBA-16. We study here, the effect of the preparation method of titania-modified SBA-16 (characteristics of the active Ti and/or TiO2 species) and the effect of the different operation conditions in ODS of DBT under mild conditions in order to find the best performance. TiO2-modified mesoporous SBA-16 and titanium-substituted mesoporous SBA-16 were developed and tested in the oxidative desulfurization (ODS) of dibenzothiophene prevailing in liquid fuel. We assessed the impact exerted on performance of different reaction variables, including (nature and amount of the active catalytic species, phase system, molar ratio of oxidant H2O2 and DBT, reaction temperature, nature of the substrate and reuse of catalysts). We achieved 90% of S removal from a 0.2 wt.% dibenzothiophene solution at 60°C in less than 1 h of reaction. The best catalytic results are obtained with high exposed surface of nanometric TiO2 species of TiO2/SBA-16 sample. The activated catalyst is very active in ODS reaction and can be reused four times with no loss in activity
Fil: Rivoira, Lorena Paola. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación Nanociencia y Nanotecnología; Argentina.
Fil: Vallés, Verónica Alejandra. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación Nanociencia y Nanotecnología; Argentina.
Fil: Ledesma, Brenda Cecilia. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación Nanociencia y Nanotecnología; Argentina.
Fil: Martínez, María Laura. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación Nanociencia y Nanotecnología; Argentina.
Fil: Anunziata, Oscar Alfredo. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación Nanociencia y Nanotecnología; Argentina.
Fil: Beltramone, Andrea Raquel. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación Nanociencia y Nanotecnología; Argentina.
Materia
ODS
Titanium
SBA-16
Nivel de accesibilidad
acceso abierto
Condiciones de uso
Attribution-NonCommercial-NoDerivatives 4.0 International
Repositorio
Repositorio Institucional Abierto (UTN)
Institución
Universidad Tecnológica Nacional
OAI Identificador
oai:ria.utn.edu.ar:20.500.12272/12607
Acceder
id RIAUTN_e982e6c45c41cc62dd19ab67089413b2
oai_identifier_str oai:ria.utn.edu.ar:20.500.12272/12607
network_acronym_str RIAUTN
repository_id_str a
network_name_str Repositorio Institucional Abierto (UTN)
spelling Sulfur elimination by ODSwith titanium-modified SBA-16.Rivoira , Lorena PaolaVallés , Verónica AlejandraLedesma , Brenda CeciliaMartínez , María LauraAnunziata , Oscar AlfredoBeltramone, Andrea RaquelODSTitaniumSBA-16Over the past, oxidative desulfurization (ODS) has drawn considerable interest as a new alter-native method for deep sulfur elimination from light oils. This can be attributed to its attractive properties, including lower temperature and pressure conditions and lower operating cost than conventional hydrodesulfurization (HDS) process. Oxidation of organosulfur compounds results in the formation of sulfoxides/sulfones, highly polar and hence easily removed by both extraction into polar solvents or by adsorption. Due to their low reactivity, dibenzothiophene derivatives (DBTs) are the most refractory species to be eliminated from oils. Hence, the ODS process through which DBTs are converted to their corresponding sulfones involves great interest at present. In this work, we describe the preparation and characterization of new mesoporous catalytic materials based on Ti-containing SBA-16. We study here, the effect of the preparation method of titania-modified SBA-16 (characteristics of the active Ti and/or TiO2 species) and the effect of the different operation conditions in ODS of DBT under mild conditions in order to find the best performance. TiO2-modified mesoporous SBA-16 and titanium-substituted mesoporous SBA-16 were developed and tested in the oxidative desulfurization (ODS) of dibenzothiophene prevailing in liquid fuel. We assessed the impact exerted on performance of different reaction variables, including (nature and amount of the active catalytic species, phase system, molar ratio of oxidant H2O2 and DBT, reaction temperature, nature of the substrate and reuse of catalysts). We achieved 90% of S removal from a 0.2 wt.% dibenzothiophene solution at 60°C in less than 1 h of reaction. The best catalytic results are obtained with high exposed surface of nanometric TiO2 species of TiO2/SBA-16 sample. The activated catalyst is very active in ODS reaction and can be reused four times with no loss in activityFil: Rivoira, Lorena Paola. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación Nanociencia y Nanotecnología; Argentina.Fil: Vallés, Verónica Alejandra. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación Nanociencia y Nanotecnología; Argentina.Fil: Ledesma, Brenda Cecilia. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación Nanociencia y Nanotecnología; Argentina.Fil: Martínez, María Laura. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación Nanociencia y Nanotecnología; Argentina.Fil: Anunziata, Oscar Alfredo. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación Nanociencia y Nanotecnología; Argentina.Fil: Beltramone, Andrea Raquel. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación Nanociencia y Nanotecnología; Argentina.Universidad Tecnológica Nacional.2025-04-03T19:26:18Z2015info:eu-repo/semantics/articleinfo:eu-repo/semantics/acceptedVersionhttp://purl.org/coar/resource_type/c_6501info:ar-repo/semantics/articulopdfapplication/pdfIMMS-9,17-20 August 2015, Brisbane, Australia.https://hdl.handle.net/20.500.12272/12607enginfo:eu-repo/semantics/openAccessAttribution-NonCommercial-NoDerivatives 4.0 Internationalhttp://creativecommons.org/licenses/by-nc-nd/4.0/Rivoira, Lorena Paola; Vallés, Verónica Alejandra; Ledesma, Brenda Cecilia; Martínez, María Laura; Anunziata, Oscar Alfredo; Beltramone, Andrea Raquel.https://creativecommons.org/licenses/by-nc-nd/4.0/reponame:Repositorio Institucional Abierto (UTN)instname:Universidad Tecnológica Nacional2026-09-24T12:43:54Zoai:ria.utn.edu.ar:20.500.12272/12607instacron:UTNInstitucionalhttp://ria.utn.edu.ar/Universidad públicaNo correspondehttp://ria.utn.edu.ar/oaigestionria@rec.utn.edu.ar; fsuarez@rec.utn.edu.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:a2026-09-24 12:43:55.294Repositorio Institucional Abierto (UTN) - Universidad Tecnológica Nacionalfalse
dc.title.none.fl_str_mv Sulfur elimination by ODSwith titanium-modified SBA-16.
title Sulfur elimination by ODSwith titanium-modified SBA-16.
spellingShingle Sulfur elimination by ODSwith titanium-modified SBA-16.
Rivoira , Lorena Paola
ODS
Titanium
SBA-16
title_short Sulfur elimination by ODSwith titanium-modified SBA-16.
title_full Sulfur elimination by ODSwith titanium-modified SBA-16.
title_fullStr Sulfur elimination by ODSwith titanium-modified SBA-16.
title_full_unstemmed Sulfur elimination by ODSwith titanium-modified SBA-16.
title_sort Sulfur elimination by ODSwith titanium-modified SBA-16.
dc.creator.none.fl_str_mv Rivoira , Lorena Paola
Vallés , Verónica Alejandra
Ledesma , Brenda Cecilia
Martínez , María Laura
Anunziata , Oscar Alfredo
Beltramone, Andrea Raquel
author Rivoira , Lorena Paola
author_facet Rivoira , Lorena Paola
Vallés , Verónica Alejandra
Ledesma , Brenda Cecilia
Martínez , María Laura
Anunziata , Oscar Alfredo
Beltramone, Andrea Raquel
author_role author
author2 Vallés , Verónica Alejandra
Ledesma , Brenda Cecilia
Martínez , María Laura
Anunziata , Oscar Alfredo
Beltramone, Andrea Raquel
author2_role author
author
author
author
author
dc.subject.none.fl_str_mv ODS
Titanium
SBA-16
topic ODS
Titanium
SBA-16
dc.description.none.fl_txt_mv Over the past, oxidative desulfurization (ODS) has drawn considerable interest as a new alter-native method for deep sulfur elimination from light oils. This can be attributed to its attractive properties, including lower temperature and pressure conditions and lower operating cost than conventional hydrodesulfurization (HDS) process. Oxidation of organosulfur compounds results in the formation of sulfoxides/sulfones, highly polar and hence easily removed by both extraction into polar solvents or by adsorption. Due to their low reactivity, dibenzothiophene derivatives (DBTs) are the most refractory species to be eliminated from oils. Hence, the ODS process through which DBTs are converted to their corresponding sulfones involves great interest at present. In this work, we describe the preparation and characterization of new mesoporous catalytic materials based on Ti-containing SBA-16. We study here, the effect of the preparation method of titania-modified SBA-16 (characteristics of the active Ti and/or TiO2 species) and the effect of the different operation conditions in ODS of DBT under mild conditions in order to find the best performance. TiO2-modified mesoporous SBA-16 and titanium-substituted mesoporous SBA-16 were developed and tested in the oxidative desulfurization (ODS) of dibenzothiophene prevailing in liquid fuel. We assessed the impact exerted on performance of different reaction variables, including (nature and amount of the active catalytic species, phase system, molar ratio of oxidant H2O2 and DBT, reaction temperature, nature of the substrate and reuse of catalysts). We achieved 90% of S removal from a 0.2 wt.% dibenzothiophene solution at 60°C in less than 1 h of reaction. The best catalytic results are obtained with high exposed surface of nanometric TiO2 species of TiO2/SBA-16 sample. The activated catalyst is very active in ODS reaction and can be reused four times with no loss in activity
Fil: Rivoira, Lorena Paola. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación Nanociencia y Nanotecnología; Argentina.
Fil: Vallés, Verónica Alejandra. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación Nanociencia y Nanotecnología; Argentina.
Fil: Ledesma, Brenda Cecilia. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación Nanociencia y Nanotecnología; Argentina.
Fil: Martínez, María Laura. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación Nanociencia y Nanotecnología; Argentina.
Fil: Anunziata, Oscar Alfredo. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación Nanociencia y Nanotecnología; Argentina.
Fil: Beltramone, Andrea Raquel. Universidad Tecnológica Nacional. Facultad Regional Córdoba. Centro de Investigación Nanociencia y Nanotecnología; Argentina.
description Over the past, oxidative desulfurization (ODS) has drawn considerable interest as a new alter-native method for deep sulfur elimination from light oils. This can be attributed to its attractive properties, including lower temperature and pressure conditions and lower operating cost than conventional hydrodesulfurization (HDS) process. Oxidation of organosulfur compounds results in the formation of sulfoxides/sulfones, highly polar and hence easily removed by both extraction into polar solvents or by adsorption. Due to their low reactivity, dibenzothiophene derivatives (DBTs) are the most refractory species to be eliminated from oils. Hence, the ODS process through which DBTs are converted to their corresponding sulfones involves great interest at present. In this work, we describe the preparation and characterization of new mesoporous catalytic materials based on Ti-containing SBA-16. We study here, the effect of the preparation method of titania-modified SBA-16 (characteristics of the active Ti and/or TiO2 species) and the effect of the different operation conditions in ODS of DBT under mild conditions in order to find the best performance. TiO2-modified mesoporous SBA-16 and titanium-substituted mesoporous SBA-16 were developed and tested in the oxidative desulfurization (ODS) of dibenzothiophene prevailing in liquid fuel. We assessed the impact exerted on performance of different reaction variables, including (nature and amount of the active catalytic species, phase system, molar ratio of oxidant H2O2 and DBT, reaction temperature, nature of the substrate and reuse of catalysts). We achieved 90% of S removal from a 0.2 wt.% dibenzothiophene solution at 60°C in less than 1 h of reaction. The best catalytic results are obtained with high exposed surface of nanometric TiO2 species of TiO2/SBA-16 sample. The activated catalyst is very active in ODS reaction and can be reused four times with no loss in activity
publishDate 2015
dc.date.none.fl_str_mv 2015
2025-04-03T19:26:18Z
dc.type.none.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/acceptedVersion
http://purl.org/coar/resource_type/c_6501
info:ar-repo/semantics/articulo
format article
status_str acceptedVersion
dc.identifier.none.fl_str_mv IMMS-9,17-20 August 2015, Brisbane, Australia.
https://hdl.handle.net/20.500.12272/12607
identifier_str_mv IMMS-9,17-20 August 2015, Brisbane, Australia.
url https://hdl.handle.net/20.500.12272/12607
dc.language.none.fl_str_mv eng
language eng
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
Attribution-NonCommercial-NoDerivatives 4.0 International
http://creativecommons.org/licenses/by-nc-nd/4.0/
Rivoira, Lorena Paola; Vallés, Verónica Alejandra; Ledesma, Brenda Cecilia; Martínez, María Laura; Anunziata, Oscar Alfredo; Beltramone, Andrea Raquel.
https://creativecommons.org/licenses/by-nc-nd/4.0/
eu_rights_str_mv openAccess
rights_invalid_str_mv Attribution-NonCommercial-NoDerivatives 4.0 International
http://creativecommons.org/licenses/by-nc-nd/4.0/
Rivoira, Lorena Paola; Vallés, Verónica Alejandra; Ledesma, Brenda Cecilia; Martínez, María Laura; Anunziata, Oscar Alfredo; Beltramone, Andrea Raquel.
https://creativecommons.org/licenses/by-nc-nd/4.0/
dc.format.none.fl_str_mv pdf
application/pdf
dc.publisher.none.fl_str_mv Universidad Tecnológica Nacional.
publisher.none.fl_str_mv Universidad Tecnológica Nacional.
dc.source.none.fl_str_mv reponame:Repositorio Institucional Abierto (UTN)
instname:Universidad Tecnológica Nacional
reponame_str Repositorio Institucional Abierto (UTN)
collection Repositorio Institucional Abierto (UTN)
instname_str Universidad Tecnológica Nacional
repository.name.fl_str_mv Repositorio Institucional Abierto (UTN) - Universidad Tecnológica Nacional
repository.mail.fl_str_mv gestionria@rec.utn.edu.ar; fsuarez@rec.utn.edu.ar
_version_ 1877230866806079488
score 13.265058

Publicaciones similares