Algoritmo convergente para flujo por curvatura media de superficies con borde fijo

Autores
Ivaniszyn, Bárbara Solange
Año de publicación
2025
Idioma
español castellano
Tipo de recurso
tesis doctoral
Estado
versión aceptada
Colaborador/a o director/a de tesis
Pauletti, Miguel Sebastián
Acosta, Gabriel
Armentano, Gabriela
Kovács, Balázs
Morin, Pedro
Descripción
Fil: Ivaniszyn, Bárbara Solange. Universidad Nacional del Litoral. Facultad de Ingeniería Química; Argentina.
El objetivo principal de esta tesis es proponer un método numérico para el flujo por curvatura media en superficies con borde fijo bajo una condición de Dirichlet y estudiar su convergencia. Desde un enfoque paramétrico, se desarrolla una formulación débil adaptando esquemas existentes para superficies cerradas, lo que requiere deducir condiciones de borde apropiadas para el vector normal y la curvatura media. Para la semidiscretización espacial se desarrolla un esquema convergente en el marco del Análisis Isogeométrico (IgA), utilizando espacios spline evolutivos producto tensorial de grado (p) mayor o igual a 2. Con este fin, se desarrollan herramientas analíticas para el tratamiento de superficies con borde, incluyendo estimaciones de los errores de perturbación geométrica sin recurrir a la función distancia orientada y la definición de operadores de tipo Ritz, lineales y no lineales, junto con el estudio de sus propiedades de aproximación y de sus derivadas materiales. Estas herramientas permiten obtener estimaciones de consistencia y estabilidad de orden óptimo y, en consecuencia, demostrar estimaciones de error de orden óptimo para el esquema semidiscreto bajo hipótesis adecuadas de regularidad. Asimismo, se presenta la discretización temporal mediante Fórmulas de Diferenciación hacia Atrás (BDF) de órdenes 2 a 5, junto con su implementación y experimentos numéricos que ilustran el comportamiento del método. Finalmente, se analizan las limitaciones y problemas abiertos que introduce la condición de borde en el estudio de la convergencia del esquema totalmente discreto y se presentan avances hacia la extensión de estas técnicas al flujo de Willmore con borde Navier y al flujo por curvatura media con condición de Neumann.
The main objective of this thesis is to propose a numerical method for the mean curvature flow of surfaces with a fixed boundary under Dirichlet boundary conditions and to study its convergence. From a parametric perspective, a weak formulation is developed by adapting existing schemes for closed surfaces, which requires deriving appropriate boundary conditions for the normal vector and the mean curvature. For the spatial semidiscretization, a convergent scheme is developed within the framework of Isogeometric Analysis (IgA), using evolving tensor-product spline spaces of degree greater than or equal to 2. To this end, analytical tools are developed for the treatment of surfaces with boundary, including estimates for geometric perturbation errors without resorting to the signed distance function, as well as the introduction of linear and nonlinear Ritz-type operators together with an analysis of their approximation properties and their material derivatives. These tools yield optimal-order consistency and stability estimates and, consequently, optimal-order error estimates for the semidiscrete scheme under suitable regularity assumptions. Furthermore, a fully discrete time discretization based on Backward Differentiation Formulae (BDF) of orders 2 to 5 is presented, together with its implementation and numerical experiments illustrating the performance of the method. Finally, the limitations and open problems arising from the presence of the boundary in the convergence analysis of the fully discrete scheme are discussed, and progress is reported toward extending these techniques to the Willmore flow with Navier boundary conditions and the mean curvature flow with Neumann boundary conditions.
Consejo Nacional de Investigaciones Científicas y Técnicas
Materia
Flujo por curvatura media
Superficies con borde
EDP geométricas
Convergencia
Análisis Isogemétrico
Estabilidad
Mean curvature flow
Surfaces with boundary
Geometric PDEs
Convergence
Isogeometric analysis
Stability
Nivel de accesibilidad
acceso abierto
Condiciones de uso
http://creativecommons.org/licenses/by-nc-nd/4.0/deed.es
Repositorio
Biblioteca Virtual (UNL)
Institución
Universidad Nacional del Litoral
OAI Identificador
oai:https://bibliotecavirtual.unl.edu.ar:11185/8907

id UNLBT_a9ce8b834b22fd9006f19a51dade36ae
oai_identifier_str oai:https://bibliotecavirtual.unl.edu.ar:11185/8907
network_acronym_str UNLBT
repository_id_str 2187
network_name_str Biblioteca Virtual (UNL)
spelling Algoritmo convergente para flujo por curvatura media de superficies con borde fijoA convergent algorithm for mean curvature flow of surfaces with fixed boundaryIvaniszyn, Bárbara SolangeFlujo por curvatura mediaSuperficies con bordeEDP geométricasConvergenciaAnálisis IsogemétricoEstabilidadMean curvature flowSurfaces with boundaryGeometric PDEsConvergenceIsogeometric analysisStabilityFil: Ivaniszyn, Bárbara Solange. Universidad Nacional del Litoral. Facultad de Ingeniería Química; Argentina.El objetivo principal de esta tesis es proponer un método numérico para el flujo por curvatura media en superficies con borde fijo bajo una condición de Dirichlet y estudiar su convergencia. Desde un enfoque paramétrico, se desarrolla una formulación débil adaptando esquemas existentes para superficies cerradas, lo que requiere deducir condiciones de borde apropiadas para el vector normal y la curvatura media. Para la semidiscretización espacial se desarrolla un esquema convergente en el marco del Análisis Isogeométrico (IgA), utilizando espacios spline evolutivos producto tensorial de grado (p) mayor o igual a 2. Con este fin, se desarrollan herramientas analíticas para el tratamiento de superficies con borde, incluyendo estimaciones de los errores de perturbación geométrica sin recurrir a la función distancia orientada y la definición de operadores de tipo Ritz, lineales y no lineales, junto con el estudio de sus propiedades de aproximación y de sus derivadas materiales. Estas herramientas permiten obtener estimaciones de consistencia y estabilidad de orden óptimo y, en consecuencia, demostrar estimaciones de error de orden óptimo para el esquema semidiscreto bajo hipótesis adecuadas de regularidad. Asimismo, se presenta la discretización temporal mediante Fórmulas de Diferenciación hacia Atrás (BDF) de órdenes 2 a 5, junto con su implementación y experimentos numéricos que ilustran el comportamiento del método. Finalmente, se analizan las limitaciones y problemas abiertos que introduce la condición de borde en el estudio de la convergencia del esquema totalmente discreto y se presentan avances hacia la extensión de estas técnicas al flujo de Willmore con borde Navier y al flujo por curvatura media con condición de Neumann.The main objective of this thesis is to propose a numerical method for the mean curvature flow of surfaces with a fixed boundary under Dirichlet boundary conditions and to study its convergence. From a parametric perspective, a weak formulation is developed by adapting existing schemes for closed surfaces, which requires deriving appropriate boundary conditions for the normal vector and the mean curvature. For the spatial semidiscretization, a convergent scheme is developed within the framework of Isogeometric Analysis (IgA), using evolving tensor-product spline spaces of degree greater than or equal to 2. To this end, analytical tools are developed for the treatment of surfaces with boundary, including estimates for geometric perturbation errors without resorting to the signed distance function, as well as the introduction of linear and nonlinear Ritz-type operators together with an analysis of their approximation properties and their material derivatives. These tools yield optimal-order consistency and stability estimates and, consequently, optimal-order error estimates for the semidiscrete scheme under suitable regularity assumptions. Furthermore, a fully discrete time discretization based on Backward Differentiation Formulae (BDF) of orders 2 to 5 is presented, together with its implementation and numerical experiments illustrating the performance of the method. Finally, the limitations and open problems arising from the presence of the boundary in the convergence analysis of the fully discrete scheme are discussed, and progress is reported toward extending these techniques to the Willmore flow with Navier boundary conditions and the mean curvature flow with Neumann boundary conditions.Consejo Nacional de Investigaciones Científicas y TécnicasPauletti, Miguel SebastiánAcosta, GabrielArmentano, GabrielaKovács, BalázsMorin, Pedro2026-07-02T14:59:03Z2025-03-28SNRDinfo:eu-repo/semantics/doctoralThesisinfo:eu-repo/semantics/acceptedVersionhttp://purl.org/coar/resource_type/c_db06info:ar-repo/semantics/tesisDoctoralapplication/pdfhttps://hdl.handle.net/11185/8907spainfo:eu-repo/semantics/openAccesshttp://creativecommons.org/licenses/by-nc-nd/4.0/deed.esreponame:Biblioteca Virtual (UNL)instname:Universidad Nacional del Litoralinstacron:UNL2026-11-05T12:32:41Zoai:https://bibliotecavirtual.unl.edu.ar:11185/8907Institucionalhttp://bibliotecavirtual.unl.edu.ar/Universidad públicaNo correspondeajdeba@unl.edu.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:21872026-11-05 12:32:41.594Biblioteca Virtual (UNL) - Universidad Nacional del Litoralfalse
dc.title.none.fl_str_mv Algoritmo convergente para flujo por curvatura media de superficies con borde fijo
A convergent algorithm for mean curvature flow of surfaces with fixed boundary
title Algoritmo convergente para flujo por curvatura media de superficies con borde fijo
spellingShingle Algoritmo convergente para flujo por curvatura media de superficies con borde fijo
Ivaniszyn, Bárbara Solange
Flujo por curvatura media
Superficies con borde
EDP geométricas
Convergencia
Análisis Isogemétrico
Estabilidad
Mean curvature flow
Surfaces with boundary
Geometric PDEs
Convergence
Isogeometric analysis
Stability
title_short Algoritmo convergente para flujo por curvatura media de superficies con borde fijo
title_full Algoritmo convergente para flujo por curvatura media de superficies con borde fijo
title_fullStr Algoritmo convergente para flujo por curvatura media de superficies con borde fijo
title_full_unstemmed Algoritmo convergente para flujo por curvatura media de superficies con borde fijo
title_sort Algoritmo convergente para flujo por curvatura media de superficies con borde fijo
dc.creator.none.fl_str_mv Ivaniszyn, Bárbara Solange
author Ivaniszyn, Bárbara Solange
author_facet Ivaniszyn, Bárbara Solange
author_role author
dc.contributor.none.fl_str_mv Pauletti, Miguel Sebastián
Acosta, Gabriel
Armentano, Gabriela
Kovács, Balázs
Morin, Pedro
dc.subject.none.fl_str_mv Flujo por curvatura media
Superficies con borde
EDP geométricas
Convergencia
Análisis Isogemétrico
Estabilidad
Mean curvature flow
Surfaces with boundary
Geometric PDEs
Convergence
Isogeometric analysis
Stability
topic Flujo por curvatura media
Superficies con borde
EDP geométricas
Convergencia
Análisis Isogemétrico
Estabilidad
Mean curvature flow
Surfaces with boundary
Geometric PDEs
Convergence
Isogeometric analysis
Stability
dc.description.none.fl_txt_mv Fil: Ivaniszyn, Bárbara Solange. Universidad Nacional del Litoral. Facultad de Ingeniería Química; Argentina.
El objetivo principal de esta tesis es proponer un método numérico para el flujo por curvatura media en superficies con borde fijo bajo una condición de Dirichlet y estudiar su convergencia. Desde un enfoque paramétrico, se desarrolla una formulación débil adaptando esquemas existentes para superficies cerradas, lo que requiere deducir condiciones de borde apropiadas para el vector normal y la curvatura media. Para la semidiscretización espacial se desarrolla un esquema convergente en el marco del Análisis Isogeométrico (IgA), utilizando espacios spline evolutivos producto tensorial de grado (p) mayor o igual a 2. Con este fin, se desarrollan herramientas analíticas para el tratamiento de superficies con borde, incluyendo estimaciones de los errores de perturbación geométrica sin recurrir a la función distancia orientada y la definición de operadores de tipo Ritz, lineales y no lineales, junto con el estudio de sus propiedades de aproximación y de sus derivadas materiales. Estas herramientas permiten obtener estimaciones de consistencia y estabilidad de orden óptimo y, en consecuencia, demostrar estimaciones de error de orden óptimo para el esquema semidiscreto bajo hipótesis adecuadas de regularidad. Asimismo, se presenta la discretización temporal mediante Fórmulas de Diferenciación hacia Atrás (BDF) de órdenes 2 a 5, junto con su implementación y experimentos numéricos que ilustran el comportamiento del método. Finalmente, se analizan las limitaciones y problemas abiertos que introduce la condición de borde en el estudio de la convergencia del esquema totalmente discreto y se presentan avances hacia la extensión de estas técnicas al flujo de Willmore con borde Navier y al flujo por curvatura media con condición de Neumann.
The main objective of this thesis is to propose a numerical method for the mean curvature flow of surfaces with a fixed boundary under Dirichlet boundary conditions and to study its convergence. From a parametric perspective, a weak formulation is developed by adapting existing schemes for closed surfaces, which requires deriving appropriate boundary conditions for the normal vector and the mean curvature. For the spatial semidiscretization, a convergent scheme is developed within the framework of Isogeometric Analysis (IgA), using evolving tensor-product spline spaces of degree greater than or equal to 2. To this end, analytical tools are developed for the treatment of surfaces with boundary, including estimates for geometric perturbation errors without resorting to the signed distance function, as well as the introduction of linear and nonlinear Ritz-type operators together with an analysis of their approximation properties and their material derivatives. These tools yield optimal-order consistency and stability estimates and, consequently, optimal-order error estimates for the semidiscrete scheme under suitable regularity assumptions. Furthermore, a fully discrete time discretization based on Backward Differentiation Formulae (BDF) of orders 2 to 5 is presented, together with its implementation and numerical experiments illustrating the performance of the method. Finally, the limitations and open problems arising from the presence of the boundary in the convergence analysis of the fully discrete scheme are discussed, and progress is reported toward extending these techniques to the Willmore flow with Navier boundary conditions and the mean curvature flow with Neumann boundary conditions.
Consejo Nacional de Investigaciones Científicas y Técnicas
description Fil: Ivaniszyn, Bárbara Solange. Universidad Nacional del Litoral. Facultad de Ingeniería Química; Argentina.
publishDate 2025
dc.date.none.fl_str_mv 2025-03-28
2026-07-02T14:59:03Z
dc.type.none.fl_str_mv SNRD
info:eu-repo/semantics/doctoralThesis
info:eu-repo/semantics/acceptedVersion
http://purl.org/coar/resource_type/c_db06
info:ar-repo/semantics/tesisDoctoral
format doctoralThesis
status_str acceptedVersion
dc.identifier.none.fl_str_mv https://hdl.handle.net/11185/8907
url https://hdl.handle.net/11185/8907
dc.language.none.fl_str_mv spa
language spa
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
http://creativecommons.org/licenses/by-nc-nd/4.0/deed.es
eu_rights_str_mv openAccess
rights_invalid_str_mv http://creativecommons.org/licenses/by-nc-nd/4.0/deed.es
dc.format.none.fl_str_mv application/pdf
dc.source.none.fl_str_mv reponame:Biblioteca Virtual (UNL)
instname:Universidad Nacional del Litoral
instacron:UNL
reponame_str Biblioteca Virtual (UNL)
collection Biblioteca Virtual (UNL)
instname_str Universidad Nacional del Litoral
instacron_str UNL
institution UNL
repository.name.fl_str_mv Biblioteca Virtual (UNL) - Universidad Nacional del Litoral
repository.mail.fl_str_mv jdeba@unl.edu.ar
_version_ 1881034374064898048
score 12.487082