Analysis of hydrogen behavior in high strength steels joints welded by SMAW.

Autores
Mansilla, Graciela Analía; Inés, Mariano Nicolás; Delpupo, Maria Noelia
Año de publicación
2020
Idioma
inglés
Tipo de recurso
parte de libro
Estado
versión publicada
Descripción
Nowadays, the worldwide consumption of welded steel products continues growing, as they are vital for the automotive, construction and machinery industries, among others. There is extensive research and development regarding hydrogen embrittlement (HE), mainly devoted to hydrogen assisted cracking. Major sources of hydrogen (H) in a weld come from water/moisture chemically bonded to electrodes, apart from the hydrogen contained in the chemical composition of steel and the environmental hydrogen absorbed by the liquid pool generated by electric arcs. During cooling, part of this H may diffuse from the welded joints into the heat affected zone (HAZ) and base metal (BM) or remain occluded in irreversible traps, such as interfaces inclusions-matrix, precipitates and martensite needles. However, H can also be trapped in vacancies and dislocations. Literature refers to this as reversible or diffusible H, that is, traps where H has a short residence time at temperature of interest and, thus, is responsible for failure. In general, the greater the amount of H retained, the greater the risk of cracking and embrittlement, leading to a significant variation in the mechanical properties of the welded steel joint. Owing to this, it is extremely important to study steel susceptibility to H damage and its consequent embrittlement. The first part of this chapter is related to the interactions between H in high strength steels during welding processes, emphasizing the effects on the mechanical properties of these welded joints. Then, H electrolytic charge in two high strength steels (SAE 1045 and a hot rolled microalloyed steel with vanadium, titanium and niobium – MLC) and experimental methodology are detailed. Afterwards, the mechanical behavior of hydrogenated steels joints and electron microscopy techniques employed are evaluated. Finally, there is a discussion of the obtained results and the conclusions reached.
Fil: Mansilla, Graciela Analía. Universidad Tecnológica Nacional. Facultad Regional San Nicolás. Departamento Metalurgia. Centro DEYTEMA; Argentina.
Fil: Inés, Mariano Nicolás. Universidad Tecnológica Nacional. Facultad Regional San Nicolás. Departamento Metalurgia. Centro DEYTEMA; Argentina.
Fil: Delpupo, María Noelia. Universidad Tecnológica Nacional. Facultad Regional San Nicolás. Departamento Metalurgia. Centro DEYTEMA; Argentina.
Peer Reviewed
Materia
Hidrógeno
Hydrogen
Soldadura
welding
Aceros de alta resistencia
High strength steels
Comportamiento mecánico
Mechanical behavior
Nivel de accesibilidad
acceso abierto
Condiciones de uso
2024-10-08T14:41:41Z
Repositorio
Repositorio Institucional Abierto (UTN)
Institución
Universidad Tecnológica Nacional
OAI Identificador
oai:ria.utn.edu.ar:20.500.12272/11606

id RIAUTN_56f68911474e62873885b2e6c78717d5
oai_identifier_str oai:ria.utn.edu.ar:20.500.12272/11606
network_acronym_str RIAUTN
repository_id_str a
network_name_str Repositorio Institucional Abierto (UTN)
spelling Analysis of hydrogen behavior in high strength steels joints welded by SMAW.Mansilla, Graciela AnalíaInés, Mariano NicolásDelpupo, Maria NoeliaHidrógenoHydrogenSoldaduraweldingAceros de alta resistenciaHigh strength steelsComportamiento mecánicoMechanical behaviorNowadays, the worldwide consumption of welded steel products continues growing, as they are vital for the automotive, construction and machinery industries, among others. There is extensive research and development regarding hydrogen embrittlement (HE), mainly devoted to hydrogen assisted cracking. Major sources of hydrogen (H) in a weld come from water/moisture chemically bonded to electrodes, apart from the hydrogen contained in the chemical composition of steel and the environmental hydrogen absorbed by the liquid pool generated by electric arcs. During cooling, part of this H may diffuse from the welded joints into the heat affected zone (HAZ) and base metal (BM) or remain occluded in irreversible traps, such as interfaces inclusions-matrix, precipitates and martensite needles. However, H can also be trapped in vacancies and dislocations. Literature refers to this as reversible or diffusible H, that is, traps where H has a short residence time at temperature of interest and, thus, is responsible for failure. In general, the greater the amount of H retained, the greater the risk of cracking and embrittlement, leading to a significant variation in the mechanical properties of the welded steel joint. Owing to this, it is extremely important to study steel susceptibility to H damage and its consequent embrittlement. The first part of this chapter is related to the interactions between H in high strength steels during welding processes, emphasizing the effects on the mechanical properties of these welded joints. Then, H electrolytic charge in two high strength steels (SAE 1045 and a hot rolled microalloyed steel with vanadium, titanium and niobium – MLC) and experimental methodology are detailed. Afterwards, the mechanical behavior of hydrogenated steels joints and electron microscopy techniques employed are evaluated. Finally, there is a discussion of the obtained results and the conclusions reached.Fil: Mansilla, Graciela Analía. Universidad Tecnológica Nacional. Facultad Regional San Nicolás. Departamento Metalurgia. Centro DEYTEMA; Argentina.Fil: Inés, Mariano Nicolás. Universidad Tecnológica Nacional. Facultad Regional San Nicolás. Departamento Metalurgia. Centro DEYTEMA; Argentina.Fil: Delpupo, María Noelia. Universidad Tecnológica Nacional. Facultad Regional San Nicolás. Departamento Metalurgia. Centro DEYTEMA; Argentina.Peer ReviewedFrancisco Silva - António Pereira - Nova Science Publishers2024-10-08T14:41:41Z2024-10-08T14:41:41Z2020-04-01info:eu-repo/semantics/bookPartinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_3248info:ar-repo/semantics/parteDeLibropdfapplication/pdf978-1-53618-342-9https://novapublishers.com/shop/recent-advances-in-welding/http://hdl.handle.net/20.500.12272/11606enginfo:eu-repo/semantics/openAccess2024-10-08T14:41:41Zhttp://creativecommons.org/licenses/by-nc-nd/4.0/Attribution-NonCommercial-NoDerivatives 4.0 InternacionalLicencia Creative Commonsreponame:Repositorio Institucional Abierto (UTN)instname:Universidad Tecnológica Nacional2026-10-29T11:26:03Zoai:ria.utn.edu.ar:20.500.12272/11606instacron:UTNInstitucionalhttp://ria.utn.edu.ar/Universidad públicaNo correspondehttp://ria.utn.edu.ar/oaigestionria@rec.utn.edu.ar; fsuarez@rec.utn.edu.arArgentinaNo correspondeNo correspondeNo correspondeopendoar:a2026-10-29 11:26:03.915Repositorio Institucional Abierto (UTN) - Universidad Tecnológica Nacionalfalse
dc.title.none.fl_str_mv Analysis of hydrogen behavior in high strength steels joints welded by SMAW.
title Analysis of hydrogen behavior in high strength steels joints welded by SMAW.
spellingShingle Analysis of hydrogen behavior in high strength steels joints welded by SMAW.
Mansilla, Graciela Analía
Hidrógeno
Hydrogen
Soldadura
welding
Aceros de alta resistencia
High strength steels
Comportamiento mecánico
Mechanical behavior
title_short Analysis of hydrogen behavior in high strength steels joints welded by SMAW.
title_full Analysis of hydrogen behavior in high strength steels joints welded by SMAW.
title_fullStr Analysis of hydrogen behavior in high strength steels joints welded by SMAW.
title_full_unstemmed Analysis of hydrogen behavior in high strength steels joints welded by SMAW.
title_sort Analysis of hydrogen behavior in high strength steels joints welded by SMAW.
dc.creator.none.fl_str_mv Mansilla, Graciela Analía
Inés, Mariano Nicolás
Delpupo, Maria Noelia
author Mansilla, Graciela Analía
author_facet Mansilla, Graciela Analía
Inés, Mariano Nicolás
Delpupo, Maria Noelia
author_role author
author2 Inés, Mariano Nicolás
Delpupo, Maria Noelia
author2_role author
author
dc.subject.none.fl_str_mv Hidrógeno
Hydrogen
Soldadura
welding
Aceros de alta resistencia
High strength steels
Comportamiento mecánico
Mechanical behavior
topic Hidrógeno
Hydrogen
Soldadura
welding
Aceros de alta resistencia
High strength steels
Comportamiento mecánico
Mechanical behavior
dc.description.none.fl_txt_mv Nowadays, the worldwide consumption of welded steel products continues growing, as they are vital for the automotive, construction and machinery industries, among others. There is extensive research and development regarding hydrogen embrittlement (HE), mainly devoted to hydrogen assisted cracking. Major sources of hydrogen (H) in a weld come from water/moisture chemically bonded to electrodes, apart from the hydrogen contained in the chemical composition of steel and the environmental hydrogen absorbed by the liquid pool generated by electric arcs. During cooling, part of this H may diffuse from the welded joints into the heat affected zone (HAZ) and base metal (BM) or remain occluded in irreversible traps, such as interfaces inclusions-matrix, precipitates and martensite needles. However, H can also be trapped in vacancies and dislocations. Literature refers to this as reversible or diffusible H, that is, traps where H has a short residence time at temperature of interest and, thus, is responsible for failure. In general, the greater the amount of H retained, the greater the risk of cracking and embrittlement, leading to a significant variation in the mechanical properties of the welded steel joint. Owing to this, it is extremely important to study steel susceptibility to H damage and its consequent embrittlement. The first part of this chapter is related to the interactions between H in high strength steels during welding processes, emphasizing the effects on the mechanical properties of these welded joints. Then, H electrolytic charge in two high strength steels (SAE 1045 and a hot rolled microalloyed steel with vanadium, titanium and niobium – MLC) and experimental methodology are detailed. Afterwards, the mechanical behavior of hydrogenated steels joints and electron microscopy techniques employed are evaluated. Finally, there is a discussion of the obtained results and the conclusions reached.
Fil: Mansilla, Graciela Analía. Universidad Tecnológica Nacional. Facultad Regional San Nicolás. Departamento Metalurgia. Centro DEYTEMA; Argentina.
Fil: Inés, Mariano Nicolás. Universidad Tecnológica Nacional. Facultad Regional San Nicolás. Departamento Metalurgia. Centro DEYTEMA; Argentina.
Fil: Delpupo, María Noelia. Universidad Tecnológica Nacional. Facultad Regional San Nicolás. Departamento Metalurgia. Centro DEYTEMA; Argentina.
Peer Reviewed
description Nowadays, the worldwide consumption of welded steel products continues growing, as they are vital for the automotive, construction and machinery industries, among others. There is extensive research and development regarding hydrogen embrittlement (HE), mainly devoted to hydrogen assisted cracking. Major sources of hydrogen (H) in a weld come from water/moisture chemically bonded to electrodes, apart from the hydrogen contained in the chemical composition of steel and the environmental hydrogen absorbed by the liquid pool generated by electric arcs. During cooling, part of this H may diffuse from the welded joints into the heat affected zone (HAZ) and base metal (BM) or remain occluded in irreversible traps, such as interfaces inclusions-matrix, precipitates and martensite needles. However, H can also be trapped in vacancies and dislocations. Literature refers to this as reversible or diffusible H, that is, traps where H has a short residence time at temperature of interest and, thus, is responsible for failure. In general, the greater the amount of H retained, the greater the risk of cracking and embrittlement, leading to a significant variation in the mechanical properties of the welded steel joint. Owing to this, it is extremely important to study steel susceptibility to H damage and its consequent embrittlement. The first part of this chapter is related to the interactions between H in high strength steels during welding processes, emphasizing the effects on the mechanical properties of these welded joints. Then, H electrolytic charge in two high strength steels (SAE 1045 and a hot rolled microalloyed steel with vanadium, titanium and niobium – MLC) and experimental methodology are detailed. Afterwards, the mechanical behavior of hydrogenated steels joints and electron microscopy techniques employed are evaluated. Finally, there is a discussion of the obtained results and the conclusions reached.
publishDate 2020
dc.date.none.fl_str_mv 2020-04-01
2024-10-08T14:41:41Z
2024-10-08T14:41:41Z
dc.type.none.fl_str_mv info:eu-repo/semantics/bookPart
info:eu-repo/semantics/publishedVersion
http://purl.org/coar/resource_type/c_3248
info:ar-repo/semantics/parteDeLibro
format bookPart
status_str publishedVersion
dc.identifier.none.fl_str_mv 978-1-53618-342-9
https://novapublishers.com/shop/recent-advances-in-welding/
http://hdl.handle.net/20.500.12272/11606
identifier_str_mv 978-1-53618-342-9
url https://novapublishers.com/shop/recent-advances-in-welding/
http://hdl.handle.net/20.500.12272/11606
dc.language.none.fl_str_mv eng
language eng
dc.rights.none.fl_str_mv info:eu-repo/semantics/openAccess
2024-10-08T14:41:41Z
http://creativecommons.org/licenses/by-nc-nd/4.0/
Attribution-NonCommercial-NoDerivatives 4.0 Internacional
Licencia Creative Commons
eu_rights_str_mv openAccess
rights_invalid_str_mv 2024-10-08T14:41:41Z
http://creativecommons.org/licenses/by-nc-nd/4.0/
Attribution-NonCommercial-NoDerivatives 4.0 Internacional
Licencia Creative Commons
dc.format.none.fl_str_mv pdf
application/pdf
dc.publisher.none.fl_str_mv Francisco Silva - António Pereira - Nova Science Publishers
publisher.none.fl_str_mv Francisco Silva - António Pereira - Nova Science Publishers
dc.source.none.fl_str_mv reponame:Repositorio Institucional Abierto (UTN)
instname:Universidad Tecnológica Nacional
reponame_str Repositorio Institucional Abierto (UTN)
collection Repositorio Institucional Abierto (UTN)
instname_str Universidad Tecnológica Nacional
repository.name.fl_str_mv Repositorio Institucional Abierto (UTN) - Universidad Tecnológica Nacional
repository.mail.fl_str_mv gestionria@rec.utn.edu.ar; fsuarez@rec.utn.edu.ar
_version_ 1880396298780147712
score 13.334379